Evo Fender Fitment Help Needed

[joegsx]

I am hoping you guys might be able to give some ideas on how to deal with the fitment issues I am running into with a set of Evo Fenders on my 2015 JK. The forward most hole on the front fenders is sitting quite far off the body. It almost appears that it is missing a bend? The rear part of the front fenders does not line up against the body either.

On the rears the two top bolt holes don't line up with the factory holes. The center of the factory hole measures 5/8 from top and the center of the hole on the new fender measures 3/4 from top. While I get the need to have to make some adjustments it seems like mine may have been made out of spec. Look forward to hearing your guys thoughts.

 

[Robar]

Looks like a QC problem. Have you contacted EVO?

 

[jesse3638]

Looks like a QC problem. Have you contacted EVO?

^^^This^^^

Another option would be a BFH and go to town on them until they fit right...haha.

 

[joegsx]

I'm reaching out. I know they have been busy since KOH.

 

[Disciple Off Road]

Wow definitely a bummer to see. I know some if not most fenders require some manipulation to line up with some holes and is usually minimal but a pain in the butt. Maybe try starting with that front bolt and see if it helps sucking it in to line up the rest working your way back. Definitely keep us posted on what EVO says though.

 

[Bierpower]

That looks to be pretty close to the same as the set I installed. They pulled in ok with the hardware.