pastorwug
New member
Well after all the wiring was matched up to the Bussmann and to the switches it was time to test it out. So here is the op check.
Op checked all circuits and they checked good. Not bad for a knuckle dragging mech.
For those wondering I used the 12v battery from a 4wheeler. I went to Home Depot and picked up mini battery clips and soldiered a red and black wires to them. Connected the battery to the bussmann as if was being installed. Then with one of the switches a connected and a 12v light connected to the relay out I flipped the switch. Wanted to make sure I hade everything connected properly and secure prior to installing it on Canvas.
R/
Will
That is a great idea, I hid all my wires and then tested them only to find a small gauge wire had broken going to my back-up camera. Yours is a better way.
Sent from my iPhone using WAYALIFE mobile app