Commando Green Rubicon

tdougherty81 said:
One of my automatic deflators must have lost calibration or the cold affected them. I have them set for 8 psi but that tire got down to 6 psi.

Sent from my SM-G892U using WAYALIFE mobile app
Click to expand...

I have some cheap ones and had one do that once. Not as low as yours but enough to flatten out the sidewall. Plus, those Coopers already manipulate easily.
 
Mike_JK_Houston_711 said:
Looks like the coilovers performed pretty damn good!


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

They did!

Andy5160 said:
Bad ass [emoji106][emoji106][emoji106][emoji106][emoji106]


Sent from my iPad using WAYALIFE mobile app
Click to expand...

Thanks

WJCO said:
I have some cheap ones and had one do that once. Not as low as yours but enough to flatten out the sidewall. Plus, those Coopers already manipulate easily.
Click to expand...

I bought the expensive ones, Coyote Enterprises. I think I just need to adjust that one and it should be good.

Stotch said:
Looks great! And like a lot of fun!!
Click to expand...

Thank you. Yes it was, one of the best places to wheel in Texas.
 
Got a couple more goodies this weekend from Exodus Jeeps. Thank you Bubba!

EVO Tailgate table
20180423_194518_resized.jpg

I was missing some hardware for the hinge plates so I decided just to use some 550 which I think works out better.
20180423_192203_resized.jpg

I swapped the previous deck I had for this, Tuffy Security Deck. Really like that the lid can be lifted up. Might add some gas struts to help hold it up.
20180423_194508_resized.jpg
 
Wasn't planning on doing much the rest of this year but here I am.

Battery crapped out on me so I gave Bubba a call at Exodus Jeeps and he got me taken care of with a Full Throttle 680
20180728_163108.jpg

Swapped my factory heated leather seats for some Corbeau heated seats. Still need the harness bars and need to figure out the airbag. Seat belt light was easy by jumping the green w/grey to the ground.
20180805_154506.jpg
20180805_151238.jpg

Also got a Yukon 1350 rear driveshaft I need to shorten and install. Got a deal on a brand new one but it was for a manual.
 
Stotch said:
I haven't seriously considered seats or done any research. I didn't realize that meant no airbags... That'd probably be a deal breaker for a DD.
Click to expand...

Airbags will be fixed, just a matter of bypassing the sensors in the seat. I went 4 point harness with standard buckle, really not much different than using the factory buckle.
 
Stotch said:
I haven't seriously considered seats or done any research. I didn't realize that meant no airbags... That'd probably be a deal breaker for a DD.
Click to expand...

Yeah up here in Canada if I put 5 point harness I still need to keep factory belts in it to or it’s illegal not like I’m totally legal anyways... push the limits till they push back haha


Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom