Commando Green Rubicon

Wrapped up the weekend with the EVO Protek System and Adam's 1350 driveshaft.

20170211_083826.jpg

20170212_093159.jpg

Front PS Diff Cover to match the rear.

20170212_170539.jpg

Dirty Dog pet barrier

20170212_094359.jpg

Not bad transformation in 2 1/2 months
20170212_182817_resized_1.png
20170212_182748.jpg
 
I really gotta invest in one of those dirty dog barriers.

Build looks awesome. Keep the pics comin.

subscribed
 
tdougherty81 said:
Thanks, 2nd time around make better decisions on what parts to upgrade with.
Click to expand...


I bet, there's quite a few things I would do different if I started over.

How hard was the pinion nut to remove?

Looks good, I gotta keep my eye open for you. Not too many Commando Green rigs running around.
 
Flat Top said:
I bet, there's quite a few things I would do different if I started over.

How hard was the pinion nut to remove?

Looks good, I gotta keep my eye open for you. Not too many Commando Green rigs running around.
Click to expand...

On my red jeep I didn't have any issues but this time it was either over torqued down or too much locktite. I could not break it loose with my impact or breaker bar. Moteaux came over with his C02 and impact, then it broke free.

I've only seen one other one in the Houston area so far. I'll be on the look out as well.
 
tdougherty81 said:
On my red jeep I didn't have any issues but this time it was either over torqued down or too much locktite. I could not break it loose with my impact or breaker bar. Moteaux came over with his C02 and impact, then it broke free.
Click to expand...

Interesting, I had the same problem on mine. I needed and extra long breaker bar and floor jack to apply upward pressure in order to break it free. Maybe just all the 13 CG rigs? :D
 
tdougherty81 said:
On my red jeep I didn't have any issues but this time it was either over torqued down or too much locktite. I could not break it loose with my impact or breaker bar. Moteaux came over with his C02 and impact, then it broke free.

I've only seen one other one in the Houston area so far. I'll be on the look out as well.
Click to expand...

I had issues with my front pinion nut too, I was able to take it off with an electric impact, I had tried with a 24" breaker bar and put a jack on it underneath and that sucker wouldn't budge.
 
Finally got the winch 100% operational. New motor and motor mount.

20170219_134349.jpg

20170219_144013.jpg

20170219_144055.jpg

Rear seat reclines. My kids will love that on long trips.

20170219_111508.jpg

20170219_115617.jpg

20170219_115605.jpg

Wired my side marker lights to work with the turn signals.

20170219_145230.jpg
 
You must log in or register to reply here.
Top Bottom