CJ buggy build

[klungly]

The engine might have to get moved to the passenger side or build a tube frame from the engine back to get enough room for the front driveshaft.

Sent from my XT1585 using WAYALIFE mobile app

 

[BABOOZLE]

Does that account for the extra lift it will have after the coilovers and 37s?


Sent from my iPhone using WAYALIFE mobile app

 

[klungly]

I'm going to have to see once I get the transfer case in. The clearance between the frame rail and transmission pan is pretty tight.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

I took a brake from the drive line and made a stand for my tubing bender out of the old role cage.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

I got my transfer case bolted up to my transmission, it was a pain. I had to remove both exhaust pipes and cut a bracket off the frame. I need to make a cross member for the transmission and a mounting bracket for the transfer case. Next will be cutting the tub and frame to get ready to start mocking up the rear axle for control arms and coilovers.

Sent from my XT1585 using WAYALIFE mobile app

 

[2Cross]

Looking good
Now is when it gets more difficult


Sent from my iPhone using WAYALIFE mobile app

 

[klungly]

Looking good
Now is when it gets more difficult


Sent from my iPhone using WAYALIFE mobile app

Thank you!! I'm really excited to get into the fabrication part of the build.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

Worked a little more. The starter got put back in and I took out the rear seat.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

Took off the rear bumper

Sent from my XT1585 using WAYALIFE mobile app

 

[2Cross]

Keep the updates coming
You must have lots of spare time now


Sent from my iPhone using WAYALIFE mobile app

 

[klungly]

Keep the updates coming
You must have lots of spare time now


Sent from my iPhone using WAYALIFE mobile app

Haha, as long as my wallet can support all the spare time.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

Took the gas tank out and removed all the wiring from the back half of the tub.. I taped off the section of tub that I need cut off and made a cut before I had to stop.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

. I've been finding wasps every now and then while working. Gotta love older vehicles that sat outside for summer.

Sent from my XT1585 using WAYALIFE mobile app

 

[BABOOZLE]

That's got to be exciting and nerve racking cutting the back half of that jeep off. Good luck!


Sent from my iPhone using WAYALIFE mobile app

 

[2Cross]

View attachment 237199. I've been finding wasps every now and then while working. Gotta love older vehicles that sat outside for summer.

Sent from my XT1585 using WAYALIFE mobile app

At least its dead [emoji88]


Sent from my iPhone using WAYALIFE mobile app

 

[klungly]

That's got to be exciting and nerve racking cutting the back half of that jeep off. Good luck!


Sent from my iPhone using WAYALIFE mobile app

There was definitely a moment of hesitation and cringing when I started to cut l Iol.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

At least its dead [emoji88]


Sent from my iPhone using WAYALIFE mobile app

It's too bad they don't start out that way lol.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

I cut through but missed a couple tub mounts, I plan on getting them later tonight.

Sent from my XT1585 using WAYALIFE mobile app

 

[klungly]

No turning back now. The back half is off. More still need to be cut off, but smaller pieces will be more manageable.

Sent from my XT1585 using WAYALIFE mobile app

 

[BananaJeep]

Nice build! This is starting to get good.... :clap2: