Cherokee & Grand Cherokee Owners

[Bullwinckle]

Heres my old XJ had a 2.5 inch Rancho lift and a little 4 banger hated and loved this thing kind of miss it now but its gone...

 

[93grandzj]

This is my 93 jeep grand Cherokee.

Engine:
The engine is a sight 6 cylinder 4.0 with
200,000 miles on it and still running strong.

Suspension:
I have a Rancho 3.5 inch short arm kit. The front end is discoed and I have Rancho socks 5000 in the back and 7000 in the front.

Drive terrain:
I have a aussie locker in the front and a Detroit in the rear. Sleeved the front and rear axles.

What I plan next for it is going to a 5.5 long arm kit. On 35's and put trusts on the front and rear axles. View attachment 15545

Sent from my HTC VLE_U using WAYALIFE mobile app

 

[BlackDiamondBound]

here is my first build and what got me in to wheeling. sold it a long long time ago had to dig deep to find pics. thing was a ton of fun.

93 ZJ I6
RE adjustable short arms
RE 4.5" springs w/ 2" pucks
RE quick disconnects
KOR adj tracbar up front something like that in the rear
cheap pro comp shocks
33's
4.56 gears
had the crappy 249 transfer case so detroit tru-trac up front
super 35 kit in the rear- detroit locker and 30 spline superior shafts
currie tie rod and rang link

 

[BlackDiamondBound]

and my current WJ

2000 4.7 v8 limited

front: 9" with 44 outers chromoly shafts CTM joints ARB locker
rear: high pinion dana 60 35 spline detroit GM disc breaks
4.88s
clayton triangulated 4 link long arms w/ rear gussets on the upper arm mounts after they started cracking the unibody
front: 16" sway a way 2.5" racer runner coil overs
rear: 16" sway a way 2" race runner coil overs mounted up threw the body into the rear cargo area
currie antirock front and rear
dual yellow tops
boxed the rear of the unibody
raised gas tank
231 transfer case swap
1350 drive shafts
arb front bumper
trail ready rear bumper
8k warn
35's
power tank

 

[in4low]

Nice we enjoy ours with the right set up they are SWEET and I would take it anywhere we would take our 4dr JKU and then some.

 

[K5ADT]

My '88. Still pretty much stock except for the 3" lift. It's a new project.

 

[l1kenother]

WOW awesome WJ! That thing is built!

and my current WJ

2000 4.7 v8 limited

front: 9" with 44 outers chromoly shafts CTM joints ARB locker
rear: high pinion dana 60 35 spline detroit GM disc breaks
4.88s
clayton triangulated 4 link long arms w/ rear gussets on the upper arm mounts after they started cracking the unibody
front: 16" sway a way 2.5" racer runner coil overs
rear: 16" sway a way 2" race runner coil overs mounted up threw the body into the rear cargo area
currie antirock front and rear
dual yellow tops
boxed the rear of the unibody
raised gas tank
231 transfer case swap
1350 drive shafts
arb front bumper
trail ready rear bumper
8k warn
35's
power tank

 

[jrmorales96]

My zj 95 318 v8 3.5" iro lift 32" km2s

 

[CerOf]

My old ZJ.

 

[CerOf]

My Old WJ on a trek through Canada:


Was the trip of a lifetime. My thanks again to the great folks of ARB and especially Chris Wood.

 

[BlackDiamondBound]

Lets hear from you MJ, XJ, ZJ, WJ & WK folks about your projects, pics, mods and specs of your rigs. Wayalife has been gracious enough to give YOU! an area to post & show off your stuff. Sooooo lets use it!!!

alright in4low lets see your rig! :clap2:

 

[tdijet]

Our family just started our first project rig this year. 1997 Cherokee Sport that was all stock with a 4.5" rubicon express short arm kit. After a little playing around in the High Lakes in NorCal, it became time to start adding to it.

Currently we're still stock on a Chrysler 8.25 and Dana 30. A Ford 8.8 with 4.88's and an ARB is being readied, and the plan is to got with a Super 30 and ARB in the front.

We wanted to run the Bushwacker flat flares, but we're getting a little too much rub still. So I have the 3 link front of a Rock Krawler 6.5" kits and will go with a set of 5.5" RE springs shackled for the rear.

Slowly but surely we're getting there, but it's been fun so far ;-)

 

[Rockdrummer93]

Here are my two

2001 Cherokee Sport

Drivetrain:
- 4.0l
- AW4 with Cooler
- NP231 with SYE
- Carolina Driveline Driveshafts front and rear

Axles:
- Front:
-Dana HP30, Aussie Locker, Riddler Cover, Alloy USA Tube Seals,
- Rear
-Dana 44, Alloy USA Shafts, Riddler Cover, High clearance shock mounts
- Yukon 4.88s

Steering:
- JCR 1-Ton OTK Steering, Steering box brace

Suspension
- 4.5" RC LA Lift,
- 1.5 Coil spacer
- TnT OTK Track Bar
- Skyjacker M95s
- Shackle Relocation with JKS Shackles

Wheels/ Tires
- 35" Cooper Discoverer STTs
- 15" Cragar D-Windows

Armor
- OR-Fab bumper
- AJ's Super Rails

89/99 Jeep Comanche

- 4.0L
- AW4
- NP231
- 97+ dash
- 97+ fenders and clip
- 1.5" leveled
- 33x10.5 KM2s

 

[Rollincoal420]

Here is my 2000 xj sport. Bought it for $500 w no title and no wheels and tires, a rc 4.5 lift, bone sock.

It's got the 4.0 (blown now soon to get stroked) aw4, 231 w sye.
D30, locked, 3.73, trussed and gusseted
Wj knuckle swap
8.8, 3.73, welded
Home brewed front bumper w lights and winch
Dual batteries,
Removable doors,
2x8 rockers
Boat sides,
3 link long arms,
15" travel front shocks,
Blown out rear shocks,
Roughly 6.5" of lift,
35x12.5 coopers


The day it came home

Trimmed up, time for riding

Batteries, bumper build, knuckle swap

Rockers, boat sides, links, shocks

The rewards

Sorry for the long post. Like I said in my intro, I like pics

Happu trails





Sent from my SCH-I545 using Tapatalk 2

 

[1yellowjk]

Nice!

sent from the john.

 

[ripperxj]

Here's my 1998 jeep cherries five speed 4.0 1 1/2 with stock tires not much done to it but its my baby

Sent from my ZTE-Z990G using WAYALIFE mobile app

 

[pvanweelden]

My first jeep- xj with 35's, built the front bumper, rear bumper w swing out tire carrier, and tube steel sliders

Sent from my LG-C800 using WAYALIFE mobile app

 

[AESTHESIS]

Worked my JK hard. Died at 260k miles. Great machines.

Aesthesis

 

[DA RUNT]

Bought a used 97 Cherokee - end build lol

 

[1yellowjk]

Picking up my new toy next week, 99 XJ. Has a 3.5" RC lift w/33's, winch, after market bumpers, lunch box locker in the front, some armor and other things....can't wait to rip into it and start making it mine...should be a blast! Pics will come soon.