Building Clutch's Battle Station

Clutch said:
Finally put on the JKS 2.5” coils and rear track bar relocation bracket. Got a true 3” of lift; will probably settle a little over time. It drives very nice, less body roll in turns and feels stable on typical road bumps.

The rear TB relocation bracket was kind of a pain and sits very close to the springs. I may need to cut a little clearance room. View attachment 294446View attachment 294447

Front shock comparison: stock vs JKS.View attachment 294448

Rear comparison.
View attachment 294449


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

That looks great! I had the jks relocation bracket on the back of mine and the bolt hit the spring when I dialed in the pinion angle. But then I lowered it and took the bracket off last winter


Sent from my iPhone using WAYALIFE mobile app
 
JKbrick said:
That looks great! I had the jks relocation bracket on the back of mine and the bolt hit the spring when I dialed in the pinion angle. But then I lowered it and took the bracket off last winter


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Interesting. I guess if it ever becomes a true issue I’ll pop for Evo’s bracket. I didn’t get the Evo one to begin with because I didn’t want to cut the stock bracket off.


Sent from my iPhone using WAYALIFE mobile app
 
Did the bracket make the spring bow? Or when the springs bowed it hit the bracket?

Since the bracket sits so close to the springs I’m going to watch for witness marks. If I find any I’ll probably just trim a little off the bracket.


Sent from my iPhone using WAYALIFE mobile app
 
Clutch said:
Did the bracket make the spring bow? Or when the springs bowed it hit the bracket?

Since the bracket sits so close to the springs I’m going to watch for witness marks. If I find any I’ll probably just trim a little off the bracket.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

When the springs bowed the spring was hitting the track bar bolt head, not actually hitting the bracket


Sent from my iPad using WAYALIFE mobile app
 
Clutch said:
Here’s a few pics I snapped this morning. I’ll take some better ones if you can’t tell what you’re looking at.
Click to expand...

Ah, yeah; that is gettin' friendly with your coil...

Like you said though, nothing a little trimming can't fix. If I ever go that route I may trim it before finishing the install. I don't need any more practice removing coil springs ;)
 
Stotch, I was looking at your OME springs and they look like they have a bigger diameter than the JKS springs, so I don’t think the JKS rear Trackbar bracket will work.


Sent from my iPhone using WAYALIFE mobile app
 
Clutch said:
Stotch, I was looking at your OME springs and they look like they have a bigger diameter than the JKS springs, so I don’t think the JKS rear Trackbar bracket will work.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...
Yeah, the JKS coils are definitely skinnier. I forgot that's what you had back there. Thanks for the tip!
 
A few pics duplicated from the Badlands April 28th thread, but I’m posting here just to document the day. It was a blast and it was cool to meet so many active wayalifers. Can’t wait to do it again!Image1525013272.548502.jpgImage1525013280.625577.jpgImage1525013287.787361.jpg
Image1525013406.748742.jpg

Sent from my iPhone using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom