Build of my JKU

[wjtstudios]

So took her on a good drive tonight and this code kept popping up. I am pretty sure it is the switch on the brake pedal but wanted to see if any of you who did the Mopar brake booster came across this.

No, I never had that pop up. Still air in the system?

 

[Weebz]

So took her on a good drive tonight and this code kept popping up. I am pretty sure it is the switch on the brake pedal but wanted to see if any of you who did the Mopar brake booster came across this.

I’ve never seen that either. Only issueninhad was resetting the position center because my brake lights stayed on.

 

[MericaMade]

I’ve never seen that either. Only issueninhad was resetting the position center because my brake lights stayed on.

I'm having same issue. Did you bend the bracket or use Jscan to correct?

 

[KevinG]

I'm having same issue. Did you bend the bracket or use Jscan to correct?

Not speaking for Weebz but I had the same problem with my brake lights. The little plunger probably got pushed in. Can be pulled back out by hand.

 

[MericaMade]

Not speaking for Weebz but I had the same problem with my brake lights. The little plunger probably got pushed in. Can be pulled back out by hand.

Yeah this guy, been messing with it all morning it's stopping me from using cruise control and remote start as well.

 

[MericaMade]

New sensor fixed everything.

 

[wjtstudios]

Problem solved

 

[Weebz]

Not speaking for Weebz but I had the same problem with my brake lights. The little plunger probably got pushed in. Can be pulled back out by hand.

Sorry. Haven’t checked back all day. Yes. Pull that plunger back out. Took me 20 minutes to figure out what was happening.

 

[TheMistress]

good thing my dainty little hands were able to get the sensor off.

 

[MericaMade]

Jesus you guys weren't kidding about the wind noise with this cage. Guess I got some fucking around to do this weekend.

 

[jdofmemi]

Wind noise means you are driving it, so it's at least part good

 

[MericaMade]

Wind noise means you are driving it, so it's at least part good

Lol you have a great point. Haha

 

[wjtstudios]

Is it gapping at the windshield frame or doors?

 

[MericaMade]

Is it gapping at the windshield frame or doors?

Its at the upper corner of the door. I think i need to shave down the top and bolt on the clamp more for a little more clearance. Its not horrible but at 60 its just annoying.

 

[wjtstudios]

Its at the upper corner of the door. I think i need to shave down the top and bolt on the clamp more for a little more clearance. Its not horrible but at 60 its just annoying.

Yeah, that would drive me nuts. It has to be right to be done, otherwise, It'll drive me crazy

 

[fiend]

Its at the upper corner of the door. I think i need to shave down the top and bolt on the clamp more for a little more clearance. Its not horrible but at 60 its just annoying.

I have this issue. For me, it doesn’t seem to be the top contacting the clamp. I think the top cage bar bowed the windshield frame slightly but enough to prevent good sealing of the freedom tops at the outside corners. Super annoying, but I don’t run the hard top much anymore these days so I’ve just lived with it.

 

[MericaMade]

Just put 500 miles on the new gears going to drain and fill the rear do I really need to do the front as well?

 

[wayoflife]

Just put 500 miles on the new gears going to drain and fill the rear do I really need to do the front as well?

Nope, no need being that nothing should be turning inside. I would say that you can go a very long time before you "need" to change out the fluid up front.

 

[wjtstudios]

Ready for trail time!!

 

[bmkrinne]

Just put 500 miles on the new gears going to drain and fill the rear do I really need to do the front as well?

Congrats on the miles! I know it was a long time coming!!