35's and no lift

[AZ Explorer]

Where did you find the covers on line? I would like to do that as well.

Look up Maximus-3 rear bumper end caps on the google and you should find them. Not a supporting vendor so I can't send you a link. They fit really well.

 

[Dirtysocks]

My rear tire was getting too close to the trimmed pinch seam on full stuff. Was not comfortable trimming any further & went with a small lift for piece of mind.

Yours might be different, make sure you have someone was watch your wheels when fully articulating offroad.


Sent from my iPhone using Tapatalk

 

[Desertman]

I'm assuming they were running on the front bumper, or were they actually rubbing in the hitop fender flares?


Sent from my iPhone using WAYALIFE mobile app

I removed the inner part of the front bumper only minor rub on some fast desert driving. On the road there was no rubbing.



Sent from my iPad using WAYALIFE mobile app

 

[ajeepthing]

My '13 jk with new 35" Gladiator X-comps and no lift yet... did cut the factory flares and my Incubus rims have great back spacing.

Built not Bought

 

[Mikecal9985]

I was wondering if 35x12.50R18 (the specs say I would need a wheel that’s 8.5-11”) would work with my stock Sahara wheels which are only 7.5”

These are the wheels that came on the Jeep!!



Sent from my iPhone using WAYALIFE mobile app

 

[avstec]

I was wondering if 35x12.50R18 (the specs say I would need a wheel that’s 8.5-11”) would work with my stock Sahara wheels which are only 7.5”

Yes they should work. I am running 315/70/17 Goodyear Duratracs on my stock Rubicon rims (7.5"wide). Goodyear says they require a 8.5" -10" rim but I have yet to have any problems. The only issue I have heard of is some tire places won't mount a tire to a rim that isn't in spec for the tire. Hope this helps. :drinks:

 

[TRLJNKY]

I was wondering if 35x12.50R18 (the specs say I would need a wheel that’s 8.5-11”) would work with my stock Sahara wheels which are only 7.5”
View attachment 292763
These are the wheels that came on the Jeep!!



Sent from my iPhone using WAYALIFE mobile app

As stated above I have been running two JK's on 35 equivalents (metric) with stock rims . One on 18's and one on 17's. No issues

 

[Mikecal9985]

Yes they should work. I am running 315/70/17 Goodyear Duratracs on my stock Rubicon rims (7.5"wide). Goodyear says they require a 8.5" -10" rim but I have yet to have any problems. The only issue I have heard of is some tire places won't mount a tire to a rim that isn't in spec for the tire. Hope this helps. :drinks:

As stated above I have been running two JK's on 35 equivalents (metric) with stock rims . One on 18's and one on 17's. No issues

Ok awesome!! Thanks guys


Sent from my iPhone using WAYALIFE mobile app

 

[Emptybrass]

315/70s


When in doubt, throttle out.

 

[Mikecal9985]

What are the coil spring numbers I would need if I wanted to get some rubi springs to replace my Sahara ones...would the rubi ones even give me a lil lift at all?


Sent from my iPhone using WAYALIFE mobile app

 

[DC303]

Here is Mine

Mammoth Rims with 4.5" BS
Mud Claw Extreme 35x12.5x17
2015 Hard Rock w/o lift

 

[DC303]

OEM Wheels for sale

Mammoth Rims with 4.5" BS
Mud Claw Extreme 35x12.5x17
2015 Hard Rock w/o lift


BTW, I do have these for sale if anyone is interested... OEM Wheels and Decent treads
We all know the cost. Make me an offer! Thanks