3" enforcer

S

sacax

New member
Anyone has pics of a 3" enforcer lift on JKU? Really curious on how it looks and only found the 4" one... :(
Didnt find any thread with something like this and I am really curious how it sits and how it performs... Also, I would like to know (and be grateful for any info) if the 3" is considered with heavy armor or not... when I get it I would like to be sure what kind of bumpers to get also... dont want to be sitting 4 " and uneven with OE bumpers...

Thanks a lot!
 
The difference between the two is negligible. I would just try to find someone who's run it with a set of 35's as that will give you what you are wanting to see.
 
looks and sounds like a awesome lift! just a little over my budget i think for the 3" or so im looking to ge ton my 2 door. hopefully someone has pics for you to see how it sits
 
cozdude said:
looks and sounds like a awesome lift! just a little over my budget i think for the 3" or so im looking to ge ton my 2 door. hopefully someone has pics for you to see how it sits
Click to expand...

as far as the budget goes, this lift does just fine with the less expensive bilsteins underneath.
 
paychex.308 said:
as far as the budget goes, this lift does just fine with the less expensive bilsteins underneath.
Click to expand...

Which Bilsteins do you recommend? I have a '13 2 door which don't think makes a difference. Any other brands you recommend? Just lookin for something to get me by until I can get some King's
 
TRAMjam said:
Which Bilsteins do you recommend? I have a '13 2 door which don't think makes a difference. Any other brands you recommend? Just lookin for something to get me by until I can get some King's
Click to expand...

I have the 5100's and if you are going to get the king's eventually I would just get those. There is no point in spending more money for the 5160's if you aren't going to keep them long.
 
OverlanderJK said:
I have the 5100's and if you are going to get the king's eventually I would just get those. There is no point in spending more money for the 5160's if you aren't going to keep them long.
Click to expand...

^^^^ this!!! if your plan is to eventually upgrade to a KING or even a FOX res. shock, just buy the 5100 and wheel with those. They are a very good shock and low on the $$$ chart!
 
thanks everyone!

what about the lift height with or without bumpers? will it be 3" or 4 with stock bumpers?
it is quite important for me...
 
cozdude said:
IF i had to guess i would say closer to 4 than 3
Click to expand...

Yeah, I think so too... which is not good for the wife and kid :) and it also means more money spent for heavy bumpers, etc... not good for the wallet either... good for the jk though... :)

I dont really know what to do now... :thinking:
 
sacax said:
Yeah, I think so too... which is not good for the wife and kid :) and it also means more money spent for heavy bumpers, etc... not good for the wallet either... good for the jk though... :)

I dont really know what to do now... :thinking:
Click to expand...

Well you do have a 4 door a just saw so it should sit closer to 3" rather than 4". From my research I have done just about every lift is based off of a 4 door. When I'm looking for lift for my 2 door I have to take that into consideration


Sent from my iPhone somewhere over the rainbow
 
sacax said:
Yeah, I think so too... which is not good for the wife and kid :) and it also means more money spent for heavy bumpers, etc... not good for the wallet either... good for the jk though... :)

I dont really know what to do now... :thinking:
Click to expand...

Just use the 3" coils and 35"s and your overall height wont be too much for them. With this lift, 3" means 3" and not like other lifts where 3" means 4.5"... and why the heavy bumpers? why cant you run your stocks?
 
paychex.308 said:
Just use the 3" coils and 35"s and your overall height wont be too much for them. With this lift, 3" means 3" and not like other lifts where 3" means 4.5"... and why the heavy bumpers? why cant you run your stocks?
Click to expand...

My guess is he is saying he would put heavy parts on it to help it sit lower..??? :idontknow:
 
Doknocker said:
My guess is he is saying he would put heavy parts on it to help it sit lower..??? :idontknow:
Click to expand...

In this case.... if you do see any sag, and not everyone does, it will be VERY LITTLE... nothing that your eyes will pick up unless you are sitting right next to another jeep with the exact same setup (minus the bumpers). Everyones jeep is gonna sit a little different based on what they have in it.

But the EVO coils run true - 3" = 3" / 4" = 4"
 
This is mine. 3" enforcer with 35's and trimmed fenders 1366251963965.jpg1366251963965.jpg

Sent from my DROID RAZR using WAYALIFE mobile app
 
paychex.308 said:
Just use the 3" coils and 35"s and your overall height wont be too much for them. With this lift, 3" means 3" and not like other lifts where 3" means 4.5"... and why the heavy bumpers? why cant you run your stocks?
Click to expand...

Thanks!

just because i dont want to end up with 4.5" :) ! and I have already settled for the LOD Lite short front bumper which they say weighs like 32 lbs which seems great... If not this one, I will go with metalcloak :D...
 
You must log in or register to reply here.
Top Bottom