12 JKU sport build
- Thread starter simonjk
- Start date
JKbrick
Active Member
JK_0311
Member
simonjk
Caught the Bug
Finally had a little free time to get the Jeep dirty. More importantly spend some quality time with my Dad. A few pics from the day.
Attachments
simonjk
Caught the Bug
It’s been a little while since I have gotten on here and posted. I have no real updates on my build. But I will have some small mods coming for the winter months to keep me busy. This week I will be fixing my HVAC blend door actuator which recently went out. Along with installing a Magnaflow exhaust. I have taken the Jeep a few small places for a little playtime by myself as I’m still looking for a group to wheel with before I take it somewhere more serious.
Attachments
simonjk
Caught the Bug
In a few weeks, I will be taking the Jeep from SC to Austin, Texas, approximately 1100 miles one way. Any recommendations on what I need to prepare other than the normal?
I will be preparing by doing the following.
-tire rotation(just did this last week)
-check breaks(just did this last week)
-change oil
-check fluids(tranny, oil, coolant)
-check battery
-check belts
-check lights
-check bolts
-pack some tools/fluids just in case
The unfortunate part is my buddy is coming with me, but can’t drive a stick. So that leaves me driving 2200 miles within 5 days.
I will be preparing by doing the following.
-tire rotation(just did this last week)
-check breaks(just did this last week)
-change oil
-check fluids(tranny, oil, coolant)
-check battery
-check belts
-check lights
-check bolts
-pack some tools/fluids just in case
The unfortunate part is my buddy is coming with me, but can’t drive a stick. So that leaves me driving 2200 miles within 5 days.
OverlanderJK
Resident Smartass
I would recommend getting a rental car and finding a new buddy who isn’t a vagina. 
simonjk
Caught the Bug
As we didn’t book a rental car in advance, I almost feel like a renting a car around here is like buying a used car based on the price.I would recommend getting a rental car and finding a new buddy who isn’t a vagina.
WJCO
Meme King
I would recommend getting a rental car and finding a new buddy who isn’t a vagina.
FFPulley77
Hooked
Seems like a good list, I did all the same on my last 1000+ mile trip.
If you’re going to be down in Austin for a while, there’s a nice place to go crawling called Hidden Falls.
simonjk
Caught the Bug
I actually checked that out last night. If I have time, I have it on the list to do. We will arrive in town on a Thursday around lunch and will be leaving early hours on a Monday. So I may not have time. But I can always add it to my list to come back for a longer period of time.
FFPulley77
Hooked
If you decide to hit it up and want someone to go with, let me know. I’m about 3 hours away from there and overdue for a trip!
simonjk
Caught the Bug
With my long distance trip coming up fast, I took the opportunity to perform some much needed maintenance. My ABS and Traction Control lights (bad wheel speed sensor) have been on for about 6 months, I decided to finally replace all 4. Now I finally have my cruise control back. I have replaced my HVAC blend door, to make sure I have heat/AC when I want it. I topped off all fluids, along with a fresh oil change. Now all I need to do is make sure my suspension bolts are nice and tight and she should be ready for the trip.
simonjk
Caught the Bug
It has been a few months since I have been able to post online due to a crazy work schedule, spending time with my family, and the holiday seasons that have passed, I thought I would post some updates as I get back into the forum.
First, we decided to just rent a car as my buddy never figured out driving a manual, and I wasn’t ready for him to cost me a new clutch.
second, I did a few things to the Jeep that needed to be done on a little free time I have had. New Heavy Duty ball joints and a new tie rod were installed as I had a slight wobble around 40mph. This solved this issue.
I was able to take the Jeep out for a day of wheeling with my family right after Christmas. We did a small portion of the Georgia Traverse. I hope to take a long weekend here soon to tackle the whole section of trails along with some camping. Here are a few pics.
First, we decided to just rent a car as my buddy never figured out driving a manual, and I wasn’t ready for him to cost me a new clutch.
second, I did a few things to the Jeep that needed to be done on a little free time I have had. New Heavy Duty ball joints and a new tie rod were installed as I had a slight wobble around 40mph. This solved this issue.
I was able to take the Jeep out for a day of wheeling with my family right after Christmas. We did a small portion of the Georgia Traverse. I hope to take a long weekend here soon to tackle the whole section of trails along with some camping. Here are a few pics.
Attachments
simonjk
Caught the Bug
A few updates on my build/plan.
Over the next few months I will be investing more and more into my Jeep. Reason being, I am pushing this year to wheel more and more, hopefully at least once a month. With it still being relatively early in the modifications (the normal lift, tires, bumpers, etc), I plan to upgrade a lot of parts to push it towards the end goal. Enough of the boring stuff, towards the upgrades.
I plan to sell one of my vehicles that I don’t use much. The money will be split into saving, and Jeep parts.
I am looking at the following:
- EVO skid plates - ordering this week
- Front and rear driveshafts - still looking into these. Any advise?
- adjustable control arms, looking at EVO
- king shocks at the rear
- coilovers at the front
Next year, I will be pushing into getting a 44 up front and building my rear axle along with moving to 37s.
Another note, thank you to those who have taken the time to look at my build thread. I personally enjoy reading others.
Over the next few months I will be investing more and more into my Jeep. Reason being, I am pushing this year to wheel more and more, hopefully at least once a month. With it still being relatively early in the modifications (the normal lift, tires, bumpers, etc), I plan to upgrade a lot of parts to push it towards the end goal. Enough of the boring stuff, towards the upgrades.
I plan to sell one of my vehicles that I don’t use much. The money will be split into saving, and Jeep parts.
I am looking at the following:
- EVO skid plates - ordering this week
- Front and rear driveshafts - still looking into these. Any advise?
- adjustable control arms, looking at EVO
- king shocks at the rear
- coilovers at the front
Next year, I will be pushing into getting a 44 up front and building my rear axle along with moving to 37s.
Another note, thank you to those who have taken the time to look at my build thread. I personally enjoy reading others.
FFPulley77
Hooked
Can’t wait to see this stage of your build!
As far as driveshafts go, I’ve got Adam’s on mine and couldn’t be happier.
As far as driveshafts go, I’ve got Adam’s on mine and couldn’t be happier.