Search results

That 1.25" difference in stated vs actual tire diameter works out to be 2.32 mph off @ 65 mph.

It's possible 🤷 since the programmer asks for tire size in diameter I just measure mine.

Use a magnet

I installed them with my big brake kit, also on 35s, and between the two of them, I have better stopping than when I had stock brakes and tires.

I have a 2009 JKU X with factory HT but no hitch, just looked at the tags from when I pulled my stock springs, and no difference between the sides. For reference mine are. Front: 52126317AB Rear: 68004458AA Looking at notes I scribbled down when I was researching lifts. The rear springs: JK...

When I did mine, also with a Superchips tuner, I measured from the shoulder of the tire to the pavement. My "35" was actually just short of 34", that was what I programmed, about every 15-20K miles I remeasure and reprogram.

We need to keep these dangerous assault bikes off the road. They are a threat to our right to speedy travel.

I think I read he is one of the crew.

Back in the 80s the summer after I turned 16 I was going 70 in a 35 on my way to work at 5:30 am. I was riding my Honda Elite 250, that my grandpa and his machinist buddy modified it to use the drivetrain from a Hawk 400 Hondamatic. I crossed through the intersection with a motorcycle cop...

Yep, a wireless temp probe.👍 @TrailHunter your up.

Max swin speed: LEFT, LEFT, L1, RIGHT, RIGHT, R2, LEFT, L2, RIGHT

Mahl stick? Used by painters.

Do you need the security gateway cable?

It's a small little worm... It's about to be a pecker wrecker... A stretch, maybe a cock fight?

Are they expanding the accessible terrain or building a lodge?

Would be helpful to have GPS coordinates of where they hang out; so we don't run into this:

A walking stick?

Pull and Pray once was a form of birth control that would get a man into trouble; now it is a method of troubleshooting. I managed a service department for electronic test and measurement equipment. I have had no formal electronics experience, but have solid troubleshooting experience, I had...