Search results

I got my PSC hydro assist installed last weekend! I turned out pretty good I think. Had to extend the tracbar bracket a bit so that I could mount the ram I also installed a cooler for the power steering fluid I was able to install the res without having to cut into the air box. It is...

So finally got my sliders welded last Wednesday!! I like them

Finally taking some time to install my PSC steering kit with a cooler!! I have all the new stuff mounted and am now working on the plumbing not bad seeing as I started today! Some pictures! I had one hell of a time getting the pitman arm off but it finally budged with a little heat Got...

Another failure? For those of you running metalcloak lifts with the front lower shock relocation brackets. Keep an eye on them, this happened to my friends jeep for the 4th time and last. It had ripped the bracket from the tube 3 times prior at the welds, I kept giving him shit for shitty welds...

I just bought a Powerbuilt 3ton all in one jack. It's great for rotating tired or any other maintenance and I plan to carry it when I go wheeling. But I also have a six ton bottle jack that fits and stays in the cubby for the stock jack for emergency use if needed.

Funny, I started with the shorter ones and moved to the longer ones 2 weeks later. I installed the 3" enforcer and longer shocks last year (9/15), the springs would barely unseat. After installing my bumper and winch my front end drooped a little so I have Added a .5" spacer in front and 3.5"...

I tried this, it didn't work out so well, maybe I was using the wrong foam?? But I squirt it in their and it seemed like it was going to work but then all the foam would just come out. It would t cure inside the frame.... So I taped the letters and tried again, it seemed like it was going to...

..........

Evo Rock sliders!

It looks like I got the gen 2's!!

I just saw this on Instagram: Does anyone here know what the differences are between gen 1 and gen 2? I just got the tracking # for mine on Monday, will I regret not having waited two weeks to order them?

Went to a meet and eat today

i saw this yesterday

Just dropped everything off at the shop

My friend finally decided to cut his fenders, we marked and cut the fronts this evening after work, moving to the rears and finishing off the fronts tomorrow

the rock jock 44 looks like a standard housing, unlike the RJ 60

Overall length from splines to threads is about 26.25" Splines to the bottom of the ¿UJoint ears? Is about 17.5"

So I got bored this evening and wanted to make sure all the parts I have ordered would fit together when I ran into this: I don't know what this should look like inside but this is what I have with the knuckles, unit bearings and axle shafts installed. Could anyone tell me if this is right or...

a friend of mine ran 35s with no lift, he just cut his pinch seems and refused to cut his factory fenders. it worked for a while, he now has a 4" lift. i would trim the fenders, where ever else necessary to prevent rubbing and 2" bumpstops in the rear, this is how i ran 37s for a couple of...