What does your oil pressure run on your 2014 JK??

King Con

King Con

New member
Just had my first oil change done at the dealership, and have a sort of uncomfortable feeling afterwards. I made sure to tell them that the oil filter changed from 2013 to 2014, and it seems they knew this information. I never looked up what the oil pressure was until after the oil change. I have a 2014 Jeep Rubicon X Unlimited that has the oil pressure readout in the vehicle information system. After the change and when I first start it up, it is reading around 95psi. This seems awful high, but maybe I am wrong. After running it for a while, it goes down to around 35 psi. I had the dealership put in Mobil 1 Synthetic. Hopefully this is normal.

Thanks,

King Con
 
I checked this morning on my way to work after I read this post. In park, at idle with the Jeep warmed up (temp needle pointing straight up) I am at 31 PSI. Driving I am at 37-39 PSI. This is on a 2014. Hope that helps some. 35 seems about right.
 
When I first fire mine up it does 80-95 until it warms up. After warming up it does around 35 at idle and 40-42 running down the road.

What does your transmission temp run? Mine is around 165 after 10 miles or so.
 
I checked again when I left from work yeasterday, mine was at 97 and dropped to 37 when warmed up, Id say your at normal operating PSI.
 
You must log in or register to reply here.
Top Bottom