VIDEO : EVO Jeep Gladiator Tailgate License Plate Mount Install

[wayoflife]

The EVO High N Tight rear bumper is something that tons of people have asked Cindy and I about ever since getting our Jeep JT Gladiator built up by our good friends over at Off Road Evolution. And, while I couldn't tell you why it took them so long to put it into production, I can tell you that it is finally being made and is now available for sale. In fact, we decided to make this video to highlight the companion tailgate license plate mount they're making for it and to show, just how easy it is to install.

EVO High N Tight Rear Bumper: https://evomfg.com/products/jeep-gladiator-rear-high-n-tight-rear-bumper?aff=2
EVO Tailgate License Plate Relocate: https://evomfg.com/products/jeep-gladiator-jt-tailgate-license-plate-relocate-left-side-black?aff=2
EVO Bomber Rocker Guards: https://evomfg.com/collections/rock-sliders-and-skins/products/bomber-rockers-for-jt?aff=2
EVO Bed Rack: https://evomfg.com/collections/roof...diator-bed-rack-half-height-bare-for-jt?aff=2
EVO Roof Rack: https://evomfg.com/collections/roof-racks-and-bed-racks/products/trail-roof-rack-bare-for-jlu?aff=2

SHOP ALL THINGS EVO: https://evomfg.com/?aff=2

I should note that these are affiliate links that EVO provided us and any purchases made through them will go to help support our channel. I would also recommend that you make purchases through Disciple Off Road here on the forum especially if you're needing them to be installed. Thank you!

#jeep #gladiator #rearbumper #highntight #licenseplatemount #evomfg #jeepgladiator #gladiatortruck #jeepjt #jtjeep #jeepgladiator #wayalife

 

[jeeeep]

 

[Bierpower]

Nice clean solution. Any plans or ideas for a license plate light?

 

[wayoflife]

Nice clean solution. Any plans or ideas for a license plate light?

I have used something like this in the past and may use it for our Gladiator too

https://amzn.to/388PeVn

 

[Bierpower]

I have used something like this in the past and may use it for our Gladiator too

https://amzn.to/388PeVn

I was thinking something like that might hit the bumper/tailgate when folded down.

 

[wayoflife]

I was thinking something like that might hit the bumper/tailgate when folded down.

If so, we've used these before too https://amzn.to/3wGS780
Mounted on the bottom facing up, I think they'd clear just fine.

 

[Lperdue]

Loved the video and EVO created a clean solution that seems to be compatible with any style of bumper.

 

[wayoflife]

Loved the video and EVO created a clean solution that seems to be compatible with any style of bumper.

Glad you liked what you saw

 

[TrailHunter]

Smart!

 

[AZVAJKU]

Slick design!

Ripley is so smart! She is definitely a problem solver.
Our dog would have either knocked over the chair or just barked until my wife got the ball for him!

 

[wayoflife]

Slick design!

Ripley is so smart! She is definitely a problem solver.
Our dog would have either knocked over the chair or just barked until my wife got the ball for him!

LOL - she really is crazy smart and yes, we've owned other dogs that would have done that too.

 

[Mike Pierson]

Great solution. Awesome you have an affiliate link now!! Congrats!

 

[DirtHeadDavis]

Super clean! The plate placement doesn't bother me like I thought it might either, almost looks like it's supposed to be on the bottom left corner on a Jeep... lol

 

[JAGS]

I almost stopped watching before the bonus footage. Ripley was not to be denied.

 

[Bierpower]

If so, we've used these before too https://amzn.to/3wGS780
Mounted on the bottom facing up, I think they'd clear just fine.

Here I was trying to get some ideas out there but the YouTube comments just went full retard

 

[WJCO]

I really like the look of that bumper. So glad they finally decided to manufacture it.

 

[wayoflife]

Great solution. Awesome you have an affiliate link now!! Congrats!

Thank you. It was super nice of EVO to provide us with one.

Super clean! The plate placement doesn't bother me like I thought it might either, almost looks like it's supposed to be on the bottom left corner on a Jeep... lol

LOL - To be honest, I wasn't sure if I'd like it either but after installing it, I think it looks great

I almost stopped watching before the bonus footage. Ripley was not to be denied.

LOL - glad you enjoyed seeing Ripley

 

[wayoflife]

Here I was trying to get some ideas out there but the YouTube comments just went full retard

LOL - it's truly frightening that there are so many people out there who are completely incapable of using the noodle in their head to come up with possible solutions. Even worse that they can find videos to watch but don't know how to use things like Google to come up with solutions. I question how any of them got this far.

I really like the look of that bumper. So glad they finally decided to manufacture it.

Me too! No lie, I've gotten tons of people asking about it ever since it was installed on our Jeep. Now, if only there were a way to light up the damn license plate

 

[wayoflife]

LOL - I knew I made a post about license plate light bolts before. Didn't realize it was over 4 years ago though

WRITE-UP : DIY License Plate Rear Cross Member Relocation Mount

Being that the all new Jeep JL Wrangler is designed with a license plate holder that's a part of the rear bumper itself, the question of where to mount the plate becomes a problem especially if you choose to run your JL bumperless. Back in the day, the easy answer would have been to simply...

www.wayalife.com

 

[Disciple Off Road]

Looks great! The High N Tight JK bumper is one of my favorites so glad to see this as an option for the JT, especially for the little extra clearance in the back. With the addition of the license plate holder, It really looks clean back there Also, thanks for adding us on the links! They have been added to the website