Tone ring not lining up with speed sensor, rear axle shaft swap.

[VeruGE*144]

Hi all,
I am swapping axle shafts in the rear today, I got one in. I noticed the speed sensor isn’t lining up with the tone ring the same way as it does with factory shafts. Almost looks like the the tone rings are pressing in too much.
Here’s factory

Here’s with Carbon off-road shaft


Looks like the sensor still be able to read the ring but, I am not sure [emoji848]. Did anybody run into this when swapping axle shafts. If so, did it cause any problems with abs?

 

[fiend]

There’s still a good amount of overlap between the sensor and the tone ring. I suspect you’ll find that everything works fine.

 

[jdofmemi]

Looks like it will still work.

My tone ring was loose and fell off. I pushed it back on carefully, but after one trip I have a code again. Haven't checked yet, but I bet it fell off again.

I may try to epoxy it.

 

[VeruGE*144]

There’s still a good amount of overlap between the sensor and the tone ring. I suspect you’ll find that everything works fine.

Looks like it will still work.

My tone ring was loose and fell off. I pushed it back on carefully, but after one trip I have a code again. Haven't checked yet, but I bet it fell off again.

I may try to epoxy it.

Thanks guys, I’ll just proceed with the other side. Worst case I just have to take everything back out and go back to stock lol.

 

[dytrdr5]

You’ll be fine, it looks like it’s close enough. They don’t have to line up perfectly, I had the same problem assembling my own set

Sent from my iPhone using WAYALIFE mobile app

 

[JKbrick]

Thanks guys, I’ll just proceed with the other side. Worst case I just have to take everything back out and go back to stock lol.

If you have to go back to stock send them to me I’ll try them [emoji51]


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

You’ll be fine, it looks like it’s close enough. They don’t have to line up perfectly, I had the same problem assembling my own set

Sent from my iPhone using WAYALIFE mobile app

It works just fine, thanks!

If you have to go back to stock send them to me I’ll try them [emoji51]


Sent from my iPhone using WAYALIFE mobile app

Everything works so far. I can send you the takeoffs if you want. You pay shipping

 

[JKbrick]

It works just fine, thanks!


Everything works so far. I can send you the takeoffs if you want. You pay shipping

You should make something cool out of them


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

You should make something cool out of them


Sent from my iPhone using WAYALIFE mobile app

Good idea. I’ll tuck them away in storage for now, probably forget about them....

 

[dytrdr5]

I kept my take offs as spares, just in case one ever breaks. They have s warranty but those take time and are useless when your miles into a trail


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

I kept my take offs as spares, just in case one ever breaks. They have s warranty but those take time and are useless when your miles into a trail


Sent from my iPhone using WAYALIFE mobile app

Yes, I am keeping my takeoffs as well.