jeepfreak24
New member
So I disconnected my grill and rad but removing the fender screws rad bolts and the rod bolts plus a few extra bolts in the rad so I could remove it, so after all this my condenser was still connected by the wiring so instead of removing them I just slide it far enough back so I could insert my own custom grill inserts now when I but it back together I can't line up the top rad bolts it's as tho it dropped a bit and shifted and that one side of the rad I can pull closer to line up the holes is there something that could be stopping it or an easier way to do this
Sent from my HTC One using WAYALIFE mobile app
Sent from my HTC One using WAYALIFE mobile app