Thanks you Ddays, hbkid22, Wjco and Wayalife!

catahoula

catahoula

Caught the Bug
Wanted to thank Jerry for all the advice and assistance, Cole for my new skins and Eddie for additional advice as well. Thanks again for the tires Doug I just got to put them back on. Thought I would wear down my old ones a little more.1476719419628.jpg1476719425113.jpg1476719430023.jpg1476719436723.jpg1476719443660.jpg

Love my skins! Just got to fix a few screws and go back to the black one I'm a thinking! Beer budget is slowly getter better!:beer::beer::honey:

Also all the others that offered some options too!!!

Sent from my XT1080 using WAYALIFE mobile app
 
Last edited:
No need for that Pete! - that's what makes this forum what it is! :thumb:
And those came out great! 37's next right? :brows:
 
GraniteCrystal said:
Looking good!

°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
http://wayalife.com/showthread.php?p=621404
Click to expand...

wayoflife said:
Nice job :thumb:
Click to expand...

Ddays said:
No need for that Pete! - that's what makes this forum what it is! :thumb:
And those came out great! 37's next right? :brows:
Click to expand...

Thanks guys! 37's? Oh fuck yeah! Then new axles, EVO enforcer, better winch, EVO tire carrier.....the list goes on and on.:)
 
1476723589413.jpg
Well I was going with those on the cross member, but I think I fucked them up. Had them all wired up and working then they stopped. Fuse is got so still thinking. Could I get more info on the ones you used and how to wire? Please?

Sent from my XT1080 using WAYALIFE mobile app
 
catahoula said:
Well I was going with those on the cross member, but I think I fucked them up. Had them all wired up and working then they stopped. Fuse is got so still thinking. Could I get more info on the ones you used and how to wire? Please?

Sent from my XT1080 using WAYALIFE mobile app
Click to expand...

If fuse is popping, they are drawing too many amps or a power wire is touching ground (more likely). Look for any wires touching metal or exposed copper near metal. Also make sure there is no condensation in the lights (rare but can cause short).
 
WJCO said:
If fuse is popping, they are drawing too many amps or a power wire is touching ground (more likely). Look for any wires touching metal or exposed copper near metal. Also make sure there is no condensation in the lights (rare but can cause short).
Click to expand...

Fuse in box has not popped. They are...

https://www.amazon.com/Auxbeam-Wate...coding=UTF8&psc=1&refRID=1Y6YTRS9E6H68VXCB091

I disconnected and will try wires.

No condensation.

Did not use wiring harness and direct wired to each side to reverse harness. Per site it stated you could do that.

Thanks Doug!
 
catahoula said:
Well I was going with those on the cross member, but I think I fucked them up. Had them all wired up and working then they stopped. Fuse is got so still thinking. Could I get more info on the ones you used and how to wire? Please?

Sent from my XT1080 using WAYALIFE mobile app
Click to expand...

This is where I put mine. I just used Eagle Eyes (search on Amazon & a bunch of options come up.) I just hacked them into my harness after I found the ones that were for the backup lights. They have worked great since and I am a full-on retard when it comes to wiring.
(LOL -Funny seeing these older photos)

l-8.jpg
 
Ddays said:
This is where I put mine. I just used Eagle Eyes (search on Amazon & a bunch of options come up.) I just hacked them into my harness after I found the ones that were for the backup lights. They have worked great since and I am a full-on retard when it comes to wiring.
(LOL -Funny seeing these older photos)

View attachment 227466
Click to expand...

Yes I saw those and am thinking on ordering a set. Thanks brother!
 
You must log in or register to reply here.
Top Bottom