JKUndaunted
New member
Hey guys. Been getting death wobble on my JK at low speeds like 15-20 mph on certain bumps and pot holes in a few places on the road for a long time. All new steering and ball joints, 7 degrees of caster, tires rotated and balanced, tires rotated on rim and rebalanced, Brakes are not dragging. So I made a new mounting area for the steering stabilizer behind the drag ling on the long side axle tube for protection of the piston from road dirt and salt. fitted a pro comp steering stabilizer as its the firmest I could get in the UK. This helped about 30%. So I decided to build another stablizer mount along the tie rod. It is in place of the sway bar bracket on the frame but if I wanted to run a sway bar I could trim the new mount to slot the sway bar saddle cap in there. This mod has removed all shakes and death wobble completely. The whole vehicle feels much more rigid as there were obviously minor shakes I had gotten used too which are now evidently eliminated.
Sent from my GT-I9300 using WAYALIFE mobile app
Sent from my GT-I9300 using WAYALIFE mobile app