stubby or mid width front bumper?

[rockredjk02]

not really sure what to go with on this one. is anyone running the ace stubby bumpers or the shrockworks mid width bumper? really want to get that plastic off the front so im better protected lol. any ideas or suggestions would be much appreciated! thanks!:thumb:

 

[munstie]

I'm running the shrockworks mid width, I am very happy with it.

2011 JKU 3.5 R.E. Longarm lift.

 

[rockredjk02]

I'm running the shrockworks mid width, I am very happy with it.

2011 JKU 3.5 R.E. Longarm lift.

the shrockworks mid width has a lot of great feedback and im really thinking about that one! thanks for the feedback!

 

[munstie]

The lead time on it sucks but to me it's worth the wait. Factory fogs bolted right in. The only thing I had to change were, to get two longer bolts to mount my winch. Two of the winch mount holes also hold the lower skid on if I remember correctly there are a total of ten bolts that mount the skid,

2011 JKU 3.5 R.E. Longarm lift.

 

[munstie]

2011 JKU 3.5 R.E. Longarm lift.

 

[rockredjk02]

It looks great! How much did it cost you?

 

[munstie]

I wanna say 600.00 or 800 without pulling my invoice I'm running there sliders and full width rear bumper with tire carrier as well. There website says 679.00

2011 JKU 3.5 R.E. Longarm lift.

 

[rockredjk02]

Bet you've got a nice rig! thanks for the feedback!

 

[munstie]

It's coming along, nicely so far, still have a long want list though, then again who doesn't :screwy:

2011 JKU 3.5 R.E. Longarm lift.

 

[munstie]

Here is a shot of the sliders. 2011 JKU 3.5 R.E. Longarm lift.

 

[Rock-itman]

The lead time on it sucks but to me it's worth the wait. Factory fogs bolted right in. The only thing I had to change were, to get two longer bolts to mount my winch. Two of the winch mount holes also hold the lower skid on if I remember correctly there are a total of ten bolts that mount the skid,

2011 JKU 3.5 R.E. Longarm lift.

I too was going to run this bumper , still may . When i called Mid January , they told me the wait was about 4 months giv or take !!! So i held off ,now im thinkin the sooner i do the better :thinking:

 

[ssh6314]

EVO 1/4 pounder stubby bumper. Isn't a better looking better looking bumper out there in my opinion, especially with the EVO stinger.

Sent from my EVO-3d using WAYALIFE app.

 

[zip04]

I just installed a Warn Rock Crawler Stubby w/ grill guard and love it.

 

[Oscar the Grouch]

big fan of my cheap bumper. Its been threw hell and I love it. Only 500. Bucks including the winch.

 

[Oscar the Grouch]

:thumbup::thumbup:

 

[jkjurny]

I have the new Poison Spyder midwidth.

 

[zip04]

Quick pics with my iPhone, but you get the idea of what the Warn stubby looks like.

 

[Holeshot]

I took a mid-width for more protection of the grill corners. In fact, I drawn it and built it with a friend.

 

[rockredjk02]

I have the new Poison Spyder midwidth. <img src="http://wayalife.com/attachment.php?attachmentid=16180"/><img src="http://wayalife.com/attachment.php?attachmentid=16181"/>

Man that bumper looks great!

 

[Rusty]

I currently have a LOD mid-width with stinger, and is sold to a friend of mine. I have on order a EVO 1/4 pounder with stinger! :clap2: looking forward to receiving it!

So.. I'd say stubby!