Steering issues

Guascone

Guascone

Member
Some months ago I installed the EVO enforcer Kit 4" with drag link flip kit…I noticed that on highway (I don't drive on highway so often...)above 50 m/h the steering become “light” and too much sensitive (no vibration)…is it possible that an improperly setting on the caster angle it is generating this bad steering reaction?
What do you suggest to check?

I just installed the Dynatrac pro steer ball joint…

Thanks!
 
Last edited:
Make sure all bolts are torqued well, but sounds like it could be a caster issue. Needs to be at 4+.
 
WJCO said:
Make sure all bolts are torqued well, but sounds like it could be a caster issue. Needs to be at 4+.
Click to expand...

Thanks for the answer! I will check it.
If I read well Eddy instruction, it means that the pinion flange should be settled at 2°+ (standard D44)...
Is it correct?
 
I did a Fast check...it’s look like that the caster is settled to 96* and the pinion flange is 0*...🤦
Is it possible that the steering wheel is transmitting me this bad feeling?


Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
Having to much air in your tires can also make that feeling as well. Try lowing it to about 28 psi (1.931 bar) see if that helps.
 
You must log in or register to reply here.
Top Bottom