Rear Driveshaft Question

Seahawkfan

Seahawkfan

Hooked
Looking at my rear DS, the slip yoke (if that's what it's called) does not appear to be slipping in or out. Isn't it supposed to slide in and out during flex? Probably have about 4in lift with the EVO long arms. No sign of anything rubbing or hitting anywhere. Just thought I should see a little shinny steel on there once in a while.
20220407_171708.jpg
20220407_171713.jpg
20220407_171740.jpg
 
There’s very little movement because the driveshaft is pretty long. If you’re concerned pull the u bolts on the axle side yoke and make sure it moves.
 
Speedy_RCW said:
There’s very little movement because the driveshaft is pretty long. If you’re concerned pull the u bolts on the axle side yoke and make sure it moves.
Click to expand...
Ok I figured if nothing was interfering or rubbing all was good. I'll check that out. Thanks for the straight answer. (This is for the other two.) I'm curious to see how much shaft I have in there already. :cool:
 
You must log in or register to reply here.
Top Bottom