Rancho sway bar discos

[jagrubb99]

http://m.quadratec.com/products/product.php?pid=16031+3911

Has anyone had experience with these? I have been looking at discos for a while and knew that rancho is a pretty reputable brand and are considering these over the JKS ones due to the price. Thanks in advance

 

[cozdude]

http://m.quadratec.com/products/product.php?pid=16031+3911

Has anyone had experience with these? I have been looking at discos for a while and knew that rancho is a pretty reputable brand and are considering these over the JKS ones due to the price. Thanks in advance

They look like they will work well. Fixed upper and disco bottom.

 

[jagrubb99]

Thanks. That's what I was thinking

 

[kaptkrappy]

So when you pull the pin and disconnect them, do they just hang there in the way or is there some way to get the top of the link out of the way and secured??

I have been using the Rough Country disco's for about 4 years.



They are super easy to disconnect and come with a bracket to hang the uppers on when disconnected. They retail for less than $70.00.

 

[cozdude]

So when you pull the pin and disconnect them, do they just hang there in the way or is there some way to get the top of the link out of the way and secured??

I have been using the Rough Country disco's for about 4 years.

View attachment 174498

They are super easy to disconnect and come with a bracket to hang the uppers on when disconnected. They retail for less than $70.00.

You could build a bracket, buy one, or just zip tie it up if you don't want to do the prior.

 

[seanb123]

What I did was buy the teraflex sway bar mount kit. I did have to do some grinding of the mounting bolt but it worked well. Looks similar to this

 

[kaptkrappy]

I have never used the Rancho disco's and I am in no way trying to sway anyone's opinion, but....

I can just imagine how hard it's going to be trying to line up both of those lower pins with the holes in the uppers at the same time.

.

 

[seanb123]

I have never used the Rancho disco's and I am in no way trying to sway anyone's opinion, but....

I can just imagine how hard it's going to be trying to line up both of those lower pins with the holes in the uppers at the same time.

.

I'm not sure if you are speaking at me but what I can say this solution I posted is the best I've found besides a real e-disconnect or an evo no limits and super easy you just pull the pin and put it on the pin at the top no need to line anything up. Takes me 2 minutes max and a lot easier then trying to zip tie it which always seam to break

 

[jagrubb99]

What I did was buy the teraflex sway bar mount kit. I did have to do some grinding of the mounting bolt but it worked well. Looks similar to this View attachment 174499

I think this may be the way I will end up going. This seems like a better solution allowing me to keep everything up and out of the way. Thanks for the input!