Prorock44 and Synergy weld on track bar bracket

[bouche03]

I searched and wasn't able to find what I was looking for; I was hoping folks with a PR44 and a weld on Synergy front trackbar bracket could post up their photos on what it looks like. I have a new housing and a bracket to be welded on, but have to cut the factory height bracket off first. Wasn't able to dig up much online...and any help would be much appreciated on where guys on WOL welded it on, and how much cutting etc was needed. Thank you!!

 

[fiend]

Don’t know that this pic shows much. I can try to take a better one later


Sent from my iPhone using WAYALIFE mobile app

 

[bouche03]

Thank you sir! Did you also cut the factory height Dynatrac bracket off? I haven't done that yet, but I am looking at the passenger side coil bucket, and it appears there might need to be some additional clearance done to get the bracket to fit...any insight on that?

 

[fiend]

Thank you sir! Did you also cut the factory height Dynatrac bracket off? I haven't done that yet, but I am looking at the passenger side coil bucket, and it appears there might need to be some additional clearance done to get the bracket to fit...any insight on that?

Yes I cut the stock bracket off completely. I don’t recall having to clearance the coil perch.

As I recall you can use the sway bar link tab as a reference point for locating the bracket.

Here are more pictures. The best I can do without removing the wheel.


Sent from my iPhone using WAYALIFE mobile app

 

[jorgelrod]

Here you go my friend...

 

[bouche03]

Thank you both! That is exactly what I was hoping to see. I appreciate you both taking the time to post these! Very helpful

Nick

 

[JKbrick]

Thank you both! That is exactly what I was hoping to see. I appreciate you both taking the time to post these! Very helpful

Nick

Still jealous of the new axle


Sent from my iPhone using WAYALIFE mobile app

 

[Lojo]

Still jealous of the new axle


Sent from my iPhone using WAYALIFE mobile app

Me too!


Sent from my iPhone using WAYALIFE mobile app