Prorock 9/16 Lug Nuts

PATRIOTKJM

PATRIOTKJM

New member
Mcguard or Gorilla or what are you running on your prorocks. Looks like anything decent is 150 to 200 bucks. hex or spline?
 
I went eBay - sdwheelcorp - and got their 32 Black 9/16 Duplex XXL Closed Ended Lug Nuts 1994-2010 for $27 shipped. They are 2.3" long.

Initial thoughts is the fit and finish looks good but still waiting on my new gear to arrive, so I haven't bolted them up. If they suck I'm only out $30.
 
Last edited:
I'm going to try and run the same gorilla "system" on the new axles that I'm currently using for my wheels now. I've been really happy with it, I just hope the key will fit without me fvcking my wheels up but I'll check that once they get back from powder coat this week.

*Edit, the size of these with the key fit the trailready wheels perfectly. I just hope they are long enough for the lugs on the axles as I see most everyone has 3" length nuts and these are only 2"... Might be a little short, story of my life.

81DO2GKaygL._SL1500_.jpg
 
Last edited:
tgoss said:
I'm going to try and run the same gorilla "system" on the new axles that I'm currently using for my wheels now. I've been really happy with it, I just hope the key will fit without me fvcking my wheels up but I'll check that once they get back from powder coat this week.

*Edit, the size of these with the key fit the trailready wheels perfectly. I just hope they are long enough for the lugs on the axles as I see most everyone has 3" length nuts and these are only 2"... Might be a little short, story of my life.

View attachment 256189
Click to expand...

How did it work out for you? I have the TR HD beadlocks as well (slim ring) and will be installing them on the axles when I get them installed. Was the 2" enough or are they too close and should have gone with the 3"? I need to get mine ordered.
 
The 2.3” I got are plenty long.

After a few months on the jeep and three tire rotations I can’t recommend the ones I bought. The finish is cracking and they are deteriorating fast. The eBay seller did give me a full refund.

My TR HD17s with the 2.3” lugs.

IMG_1866.JPG
 
g00se04 said:
I had to run these for my HD 60/60 set to work with atx beadlocks

https://www.amazon.com/gp/product/B008XO5N7U/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Click to expand...

Anyone know the length of these - I see them recommended a few times ????

Finn Sizzle said:
How did it work out for you? I have the TR HD beadlocks as well (slim ring) and will be installing them on the axles when I get them installed. Was the 2" enough or are they too close and should have gone with the 3"? I need to get mine ordered.
Click to expand...

Which lug nuts did you go with ?

Bigjimbo said:
The 2.3” I got are plenty long.

After a few months on the jeep and three tire rotations I can’t recommend the ones I bought. The finish is cracking and they are deteriorating fast. The eBay seller did give me a full refund.

My TR HD17s with the 2.3” lugs.

View attachment 284200
Click to expand...

Did you end up replacing them ?





So sometimes things just suck - I finished my PRO Rock axle install last week - waited a week for my Adams 1350 driveshafts - pulled out of the driveway and realized something wasnt right - pulled back in the garage - jacked up the back of the jeep and realized the tires I had torqued down were awful loose ---darn it - bought the wrong size lug nuts back in June that measured 1.7" long - frustrated I ordered these Link which measured 2" - paid extra to have them here next day - Installed them------ARGH still too short again --- this is on the rear axles......
now its Thursday and looks like Im looking at next before I can get the right lugs --- give me some links ?
 
Deacon said:
Anyone know the length of these - I see them recommended a few times ????



Which lug nuts did you go with ?



Did you end up replacing them ?





So sometimes things just suck - I finished my PRO Rock axle install last week - waited a week for my Adams 1350 driveshafts - pulled out of the driveway and realized something wasnt right - pulled back in the garage - jacked up the back of the jeep and realized the tires I had torqued down were awful loose ---darn it - bought the wrong size lug nuts back in June that measured 1.7" long - frustrated I ordered these Link which measured 2" - paid extra to have them here next day - Installed them------ARGH still too short again --- this is on the rear axles......
now its Thursday and looks like Im looking at next before I can get the right lugs --- give me some links ?
Click to expand...

The gorilla lug nuts that Highoctane suggested above are the one's you want.


Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
I’m still using them, they just look like crap up close.

$27 shipped for 32 i got cheap quality metal - which I expected at less than a buck a lug. I will replace them eventually, but I don’t drive a show jeep, I just want it safe and reliable.

IMO the 2.3” lugnuts are a tad too long. They keep the socket off the powder coat though.
 
Last edited:
Just wanted to share with everyone that I tried the 2” DP accessories lugs and they were just too short. I ultimately went with the 3” Gorilla lugs (as earlier recommended). Good to roll!

Image1530495828.865652.jpg


Sent from my iPad using WAYALIFE mobile app
 
Last edited:
Bringing up a old thread being the lugnuts fell off my radar during my build. Are the gorillas still the go to for lugs on the 60s or has something new popped up?

Sent from my SM-G996U using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom