Noob sway bar disconnect question

[RitaRunner]

I installed my lift, so I know that the springs aren’t really connected to anything. So if I put a sway bar disconnect in, and flex all the way, what prevents the springs from coming out?

 

[JT@623]

The shock

 

[DirtHeadDavis]

Assuming your lift is installed correctly, and with corresponding components, your bump stops should be extended properly and your shocks should be for the right amount of lift height.

 

[RitaRunner]

Assuming your lift is installed correctly, and with corresponding components, your bump stops should be extended properly and your shocks should be for the right amount of lift height.

The lift kit installed was the mopar 2” kit, so I assume all the parts are sized correctly.

 

[bobfriesenhahn]

I installed my lift, so I know that the springs aren’t really connected to anything. So if I put a sway bar disconnect in, and flex all the way, what prevents the springs from coming out?

As mentioned by others, correct shock extension length should keep your suspension from extending so far that the springs fall out.