Needed 2” rear bump stop extension

[whytiptoe]

I already have 3” on my 16 JKUR but they are to tall and I have more than enough wheel well to go further.


Sent from my iPhone using WAYALIFE mobile app

 

[VeruGE*144]

You need to make sure you won’t over compress your shocks before decreasing your bumps, no matter how much wheel well space you have.


Sent from my iPhone using WAYALIFE mobile app

 

[wayoflife]

You need to make sure you won’t over compress your shocks before decreasing your bumps, no matter how much wheel well space you have.


Sent from my iPhone using WAYALIFE mobile app

This ^^^

Definitely want to run as much coil spacer as you have lift to help prevent over compression of your coils.

 

[whytiptoe]

Thank you and totally get that as well. Wish I had the photo to show you what it looks like with bump stop completely compressed.


Sent from my iPhone using WAYALIFE mobile app

 

[hinrichs]

looks like you still have room to compress in that picture

 

[Samuelh3]

The rear bumpstop isn’t fully compressed. Make sure your not bottoming out your shocks as you’ll damage them over time. You’ll want to have just a touch of travel left on the shock to prevent it from bottoming out completely. If this is the EVO kit or similar 3” should be ideal. You’ll still have room in the wheel well but the shock will be pretty close to being fully compressed.


Sent from my iPhone using WAYALIFE mobile app