My EVO Rocksliders came in

[monstrousmac]

Well, my EVO rocksliders came in and started to paint them. I took OverlanderJK and others advice and scrapped the POR 15.

 

[TrailHunter]

Weel, my EVO rocksliders came in and started to paint them. I took OverlanderJKand others advice and scrapped the POR 15.

Nice! Low or High Angle?

 

[monstrousmac]

Nice! Low or High Angle?

I went back and forth and decided to go high angle.

 

[Tanktitan]

Well, my EVO rocksliders came in and started to paint them. I took OverlanderJK and others advice and scrapped the POR 15.

What is the pro/con issue with POR 15?


Sent from my iPhone using WAYALIFE mobile app

 

[OverlanderJK]

What is the pro/con issue with POR 15?


Sent from my iPhone using WAYALIFE mobile app

POR-15 is for rusted areas. Not something that is brand new.


Sent from my iPhone using WAYALIFE mobile app

 

[Andy5160]

Nice!! Welding them yourself or others?

 

[monstrousmac]

Well, I am going to attempt to do them myself. I did my C-Gussets and built my stinger bar myself and welded it to my bumper. I think they turned out ok.

 

[monstrousmac]

I don't know, I just don't like other people working on my jeep. When I had warranty work done I watched them the whole time. It is like going to the hospital and them operating on your child, hahahaha!

 

[monstrousmac]

Finished Painting EVO Sliders

Well, here they are finished painting them. On one side where the EVO Logo is has a few blemishes. Initially I had them standing on a table, well a friend bumped the table and they fell over with wet paint and the cardboard under them left impressions. I figure with the heck with it they are going to get banged up anyway. I did end up hanging them up from the ceiling, which I should have done in the first place, but was a little lazy.

 

[catahoula]

What is the pro/con issue with POR 15?


Sent from my iPhone using WAYALIFE mobile app

It's also not UV resistant and has to be top coated. I coated with a poly urethane.

Sent from my XT1080 using WAYALIFE mobile app

 

[catahoula]

Well, here they are finished painting them. On one side where the EVO Logo is has a few blemishes. Initially I had them standing on a table, well a friend bumped the table and they fell over with wet paint and the cardboard under them left impressions. I figure with the heck with it they are going to get banged up anyway. I did end up hanging them up from the ceiling, which I should have done in the first place, but was a little lazy.

Turned out awesome!

Sent from my XT1080 using WAYALIFE mobile app

 

[monstrousmac]

Thank you, I appreciate it.

 

[RMC2]

Looks nice

 

[Eroc147]

Look good. Is that Truck bed coating rubbery? Doesn’t seem to be textured at all. Just curious as my Boatside Bombers are on the way. And I may do the same thing with them. They look great, how many coats of each?


Sent from my iPhone using WAYALIFE mobile app

 

[monstrousmac]

No, it is not rubbery, but it does have a little bit of texture.

 

[monstrousmac]

Do yourself a little favor and hang them while painting. i tried standing them on the feet propped up, it did not go so well. I put 3 coats of the self etching primer on and about four coats of paint.

 

[WJCO]

Look good. Is that Truck bed coating rubbery? Doesn’t seem to be textured at all.

It almost looks like powdercoat when it's done. It's pretty cool stuff. Easy to touch up as well.

 

[MKBCE]

Those look nice and looks like a you did a good job painting them. How much does a set weigh ???


Sent from my iPhone using WAYALIFE mobile app

 

[monstrousmac]

You know, I did not look at the shipping label to see how heavy they were. I really have no idea, but they are not that bad.

 

[RockingK]

Great job, I think they turned out nice and will provide awesome protection:rock: