Max-bilt tail light install on JK help!

[babykud]

Anyone ever install Max bilt tail lights on a jk?

I'm trying to figure out the wiring and the instructions they give don't include a jk. Not sure if I need any resistors or not. Any help would be great

http://www.maxbilt.com/max-bilt-new-trail-tail-led-taillights.html

 

[RSQCON]

I'm running them on my 17 and they work fine without resistors

 

[babykud]

I'm running them on my 17 and they work fine without resistors

Can you share the wiring diagram for both sides please?

Also did you use the max bilt adaptors? If so, do you have a pic you can share?

 

[RSQCON]

I didn't take any pictures. All I did was cut the connectors off the factory tail lights and then pinned out the aftermarket lights. Once I figured it out (took less than 5 min) I spliced the factory pigtail onto the new lights. Was pretty easy.

 

[babykud]

I didn't take any pictures. All I did was cut the connectors off the factory tail lights and then pinned out the aftermarket lights. Once I figured it out (took less than 5 min) I spliced the factory pigtail onto the new lights. Was pretty easy.

Got them to work but I'll need the resistor. They flash too fast and the dash is saying they are both out. Did you use the max-bilt adaptors to mount them???

 

[RSQCON]

Running them on Gen-Right corners.

 

[JAGS]

Wonder if these are remanufacture/rebranded oro lights. Look similar.

 

[TrainWreck618]

Wonder if these are remanufacture/rebranded oro lights. Look similar.

They sure look like the ORO lights, just not as glossy. Hope this isn't a design rip off, cause that would be pretty lame..


Sent from my iPhone using WAYALIFE mobile app

 

[catahoula]

Yup they look like a ORO copy to me too!

 

[monstrousmac]

Will these work with the EVO Corner skins?

 

[catahoula]

Oro had a kit you. Can get for those corner. I believe you can down load it from their site .

Sent from my XT1080 using WAYALIFE mobile app

 

[Cobound]

Definitely not knockoffs, much better quality than ORO and the cheap Truck-Lites im replacing.

Not a plug n play either, no directions, so you need to look up the wiring for the vehicle you’re using them in. JK in my case. In the middle of my install now, looks like I’ll be making a parts run, need bolts and shrink connectors :/

 

[TrainWreck618]

Definitely not knockoffs, much better quality than ORO and the cheap Truck-Lites im replacing.

Not a plug n play either, no directions, so you need to look up the wiring for the vehicle you’re using them in. JK in my case. In the middle of my install now, looks like I’ll be making a parts run, need bolts and shrink connectors :/

They sure look like a cheap version of ORO's light to me. Pretty lame they don't even tell you how to wire them up...


Sent from my iPhone using WAYALIFE mobile app

 

[Exodus 4x4]

They sure look like the ORO lights, just not as glossy. Hope this isn't a design rip off, cause that would be pretty lame..


Sent from my iPhone using WAYALIFE mobile app

There is a rip-off design out there. ORO used to make the lights for GenRight until GR decided they would rather have someone in China make it for them. Most likely this is the same product.


Sent from my iPhone using WAYALIFE mobile app