Magnaflow #16666 cat-back

[thdrhntr]

I recently installed the Magnaflow Series MF #16666 Cat-Back exhaust. My problem is finding an aftermarket rear bumper that clears the exhaust tip. The clearance of the exhaust tip is 5/8" below the frame rail.
Anyone have this setup or what would you recommend.

 

[sipafz]

Welcome to Wayalife!

 

[WJCO]

Ditto.ish.

 

[BaddestCross]

Ditto.ish.

View attachment 305055

I used this one, but the cordless version.

--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

 

[Brute]

View attachment 305054

Welcome to Wayalife!

Ditto.ish.

View attachment 305055

I used this one, but the cordless version.

--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

And cut the tip at a 45 degree angle...spend less time opening your exhaust with a pry a bar on the trail...

 

[thdrhntr]

And cut the tip at a 45 degree angle...spend less time opening your exhaust with a pry a bar on the trail...

Thanks for the info! Going to cut off the tip and add a turn down style tip from Magnaflow.

 

[Clifford33]

You don’t need an exhaust tip aha


Sent from my iPhone using WAYALIFE mobile app

 

[BaddestCross]

You don’t need an exhaust tip aha


Sent from my iPhone using WAYALIFE mobile app

This. I didn't install the tip that came with the system I purchased, then cut the pipe back at an angle so it would stop before the rear bumper.


--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407