KMC Machete Wheel HELP

[RSQCON]

Anybody know the bolt torque value for the beadlock rings?

 

[jeeeep]

Anybody know the bolt torque value for the beadlock rings?

the torque for my ATX chamber proII is 21 F/LBS, I believe most beadlocks are in the 20-25 Ft/Lb range

 

[Robertcrav]

23ft-lbs

Sent from my SAMSUNG-SM-N920A using Tapatalk

 

[SDG]

20/25 is what I recall seeing on the box insert. The insert was identical to that of slabs as I remember.

Sent from my SM-G955U using WAYALIFE mobile app

 

[JeepJeep75]

The instructions for my Machetes called for 24 foot pounds. My torque wrench goes from 25-250 so I just put mine at 25 and went for it. Get yourself a stool to sit on because you'll be at each tire for a bit. I know it's not traditional for tightening sequences but I just went in a circular pattern until all the bolts clicked. I think I went around about 8 times. That's a lot of clicking. Part of the fun of owning beadlocks. [emoji847]


Sent from my iPhone using WAYALIFE mobile app

 

[RSQCON]

All. 5 done thanks for the torque recommendations. We found in listed as 20-24 ft lbs on the box insert for future reference.