Just finished a trailer

turnerbjt

turnerbjt

New member
I just wanted to post some pics of a trailer project that I have been working on. This is how it turned out so far. I may do a full build write up if there is interest.
51.JPG52.JPG53.JPG54.JPG55.JPG
I started with a harbor freight trailer kit and went from there.
If you have any questions or suggestions let me know.
 
Nice. Build up for me also. I guess you could put a pintle hitch on there.

Sent from my SM-N900W8 using WAYALIFE mobile app
 
SteelBadger said:
Nice job! The wood looks great. How is the weight compared to the steel/aluminum ones?
Click to expand...

I used a light wood. It's 3/4 inch tongue and groove cedar with 5/4 x 4 inch cedar boards for the verticle pieces. I'll have to weigh the sides to see how much they weigh exactly, but they were pretty light, I added a 1 inch angle iron rim on the top of the wood sides to protect the wood edges from impacts. I was going to paint it to match my jeep but the wood looked so pretty, i just put a few coats of outdoor polyurethane on it.
 
turnerbjt said:
I used a light wood. It's 3/4 inch tongue and groove cedar with 5/4 x 4 inch cedar boards for the verticle pieces. I'll have to weigh the sides to see how much they weigh exactly, but they were pretty light, I added a 1 inch angle iron rim on the top of the wood sides to protect the wood edges from impacts. I was going to paint it to match my jeep but the wood looked so pretty, i just put a few coats of outdoor polyurethane on it.
Click to expand...

Definitely the right idea on the polyurethane. The wood looks great.

Levi

2013 CG JKU 6-speed
 
Great job :thumbup: I'd be interested in seeing a write up to on the build.

Sent from my SPH-L710 using WAYALIFE mobile app
 
Awesome! The natural wood look is great. Nice job.

Sent from my SM-N900V using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom