Jk headlights

[Jason12]

I need to adjust the heighth on my headlights after lift install. Do I need to pull off the grille to get to them? I seen the screws on outside oh lights r these for adjusting if so which ones do height?

 

[MedixJK]

I need to adjust the heighth on my headlights after lift install. Do I need to pull off the grille to get to them? I seen the screws on outside oh lights r these for adjusting if so which ones do height?

Nope no need. Its the one on the side( i think)

 

[swampdog]

Nope no need. Its the one on the side( i think)

You are correct. If you google "jk headlight adjustment" Eddie's write-up if the first thing that pops up. Google is your friend

 

[Jason12]

Ok thanks fellas. I'll search for the write up

 

[toxicwaste29]

When I mine I didn't follow the write up. I measured from the ground up to the center of the headlight. I then moved it back 20 or 25' I can't remember and measured up that far and set the lights to that height

 

[allwhitejeeps]

You dont need to remove the grille you just need a driver that can reach it.

 

[Journeyman]

Set mine at three feet up to the very top of the spot at a distance of twenty five feet. Find Eddie's write up and follow it. Also make sure your sitting on level ground.
There's also a write up floating around here on horizontal adjustment. A little bit more involved than the vertical adjustments. But still nothing serious that most people should be able to handle.

 

[notnalc68]

T15 torx fits it. Use the screwdriver type