JK differential breather tube
- Thread starter bmkrinne
- Start date
wjtstudios
Hooked
I run an ARB diff breather in the front and in the rear behind the drivers side tail light. I’ve had good luck with them.
2015 JKUR AEV JK350
1985 CJ8 Scrambler
WJCO
Meme King
Measure the ID of the existing tube. Then go to an auto parts store, they have bulk rolls of that stuff and they will cut it to any length you want.
jesse3638
Hooked
I just took the tubing to Napa and they gave me a recommendation and cut thr length I needed. It cost a couple bucks
Sent from my SM-G973U using WAYALIFE mobile app
MericaMade
Active Member
rubiDave
Active Member
jeeeep
Hooked
This is what I did :thumb:
Slimebones
Active Member
What about that one-way valve on the outlet end of the line? Can you find that anywhere besides the dealership?
jesse3638
Hooked
Why not just pull it out of the old breather hose. That's what I did. I mean if its brittle and breaks that would warrant a new one.
Sent from my SM-G973U using WAYALIFE mobile app
jeeeep
Hooked
This ^^ same valve as Mopar
Slimebones
Active Member
Thank you much. Had forgotten I needed one of these.
MericaMade
Active Member
bmkrinne
Active Member
Thanks guys. I appreciate all the info and different options. More than one way to skin this cat!
I’ll remove my existing tube and start with the O’reilly’s down the street. If I can’t reuse the valves, you all have pointed me in that direction as well.
You all ROCK!
Sent from my iPhone using WAYALIFE
I’ll remove my existing tube and start with the O’reilly’s down the street. If I can’t reuse the valves, you all have pointed me in that direction as well.
You all ROCK!
Sent from my iPhone using WAYALIFE