Is my drag link bent?

AlStew

AlStew

New member
My drag link had this upward bend. Is that how they’re supposed to be? Or do I need to replace it? I did my best to take a picture. I hung a light behind the drag link and held a straight edge and there’s about a 3/16” gap

IMG_5010.jpg


Sent from my iPhone using WAYALIFE mobile app
 
wjtstudios said:
If your not running hydro assist, turning 37s will do that and then some. My Fusion has held up really well behind a PSC big bore Xdll. Still perfectly straight.


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

I’m on stock steering with 37’s. I’m pretty easy on the steering and only usually turn the wheels with momentum. I’m jealous of your setup and wish I could afford it!



Sent from my iPhone using WAYALIFE mobile app
 
Is my Drag Link Bent? It’s bending down a bit... tried holding the straight edge at the center of the arch. I just can’t believe it would bend with 31” tires.. Is that a factory arch?

IMG_9220.jpg
 
When I have something bent, it is usually pushed up from a stray rock I rubbed on.

Maybe you need to rub up against one to push it back😁
 
jdofmemi said:
When I have something bent, it is usually pushed up from a stray rock I rubbed on.

Maybe you need to rub up against one to push it back😁
Click to expand...

Right! Thought it was strange that it bent down.... but maybe it's just smiling from all the fun we've had... :D
 
You must log in or register to reply here.
Top Bottom