Inner Fender liners

[monstrousmac]

So, I am installing my EVO Rocksliders this week. Currently I have the EVO Rcokskins with the Rubi Rails, which I had initially drilled a whole on each front side of the end cap and used a plastic push pin fastener to attach my inner trimmed fend flares to keep them from moving around.

So, now that the Rubi rails are gone I was wondering about installing the Rough Country Inner Fender Flares (I know it is Rough Country, but I figured they were cheap and just fender flares). Does anyone here have them installed and are they OK, or are the ACE Engineering ones better. I really don't want to spend more then 200 dollars on inner fender flares.

Here are the ones I was looking at - https://www.amazon.com/Rough-Countr...ns&keywords=rough+country+inner+fenders&psc=1

 

[jeeeep]

I went with the ACE only because of the weight.

Jeep's already heavy enough and honestly, after I got them I came to the conclusion I should've just trimmed up the plastic liners. :doh:

 

[Whitarmy]

I have the rough country and am happy. I like how they plug the hole going back in the fender unlike most inner fender kits. Make sure you add locktite on the bolts though. I was lazy at first and they loosened enough to rattle.


Sent from my iPhone using WAYALIFE mobile app

 

[Gobicon2017]

Glad I went with evo’s


Sent from my iPad using WAYALIFE mobile app

 

[DWiggles]

Why not just drill a hole in the front body mount and do exactly what you did before?

 

[RUBEERCON]

I have ACE. They fit well and the LED marker light is included. They do not cover the pocket like RC and a few others do. I cut a pice of 1/4 rubber and made a pocket cover.