Help finding Correct Wiring Harness Cover

J

Jim Dandy

Member
Hey Jeepsters.

I bought off ebay what is supposed to be the plastic cover that hides the wiring harness on the drivers side just after the door cut out. It's almost 10 inches long and requires 3 small screws..the problem is that it's hard plastic and will not mold to the contour of the body as it runs back to the rear hub.

Do I have the wrong part part for this application?

If so, what is the correct part called and where can I find it. I've tried searching online and YT amd am not pulling up anything else.

I appreciate the help.

Thoughts?,
Jim
 
True. Sorry about that.

It's a 79. I don't have the body here with me as it's off to the painters and I've yet to find an example image online.

Essentially inside the tub, on the driver's side, the harness continues on to the back of the tub for the rear marker lights and tail lights. To hide it somewhat, it runs under the lip of the driver door cut out.. as soon as it clears the cut out and passes the rollbar toward the rear wheel well, there is a cover that protects/hides the harness wire.
 
You must log in or register to reply here.
Top Bottom