Front axle Johnny Joints

[CalSgt]

Has anyone used the Johnny Joints that replace the bushings pressed in the front axle housing? Are they worth while?

Asking because I have the front axle out & most of the EVO long Arm Coilover setup complete, figured they would be easier to replace with the axle on the bench while I'm setting up the gears.

These:

https://www.polyperformance.com/shop-by-application/jeep/jeep-jl/rockjock-jeep-jl-wrangler-jt-gladiator-frontend-housing-johnny-jointr-kit

 

[wayoflife]

Don’t do it. Speaking from experience here. You’re better off with the clevite bushings.


Sent from my iPhone using WAYALIFE

 

[CalSgt]

Don’t do it. Speaking from experience here. You’re better off with the clevite bushings.


Sent from my iPhone using WAYALIFE

Thanks! Factory bushings it is :thumb:

 

[jesse3638]

They look like a better option than the stock rubber bushings in my JK. Give em a go and let us know how they work out.

Edit: Nvm listen to Eddie...Haha

Sent from my SM-G973U using WAYALIFE mobile app

 

[JKbrick]

Don’t do it. Speaking from experience here. You’re better off with the clevite bushings.


Sent from my iPhone using WAYALIFE

Do you get death wobble when the joints wear out? Had always wondered about these too


Sent from my iPhone using WAYALIFE mobile app

 

[wayoflife]

Do you get death wobble when the joints wear out? Had always wondered about these too

Nope, just more bind free flex :crazyeyes: