FishsJK
New member
Purchased my jeep and it has a frame chop done well installing a new bumper I noticed the two from bolts going through the frame, the passenger side had about 1/4" of steel holding the bolt, the driver side missed the frame rail completely , with that the two other bolts are about 4" deep into the frame... I'm wondering what I should do in this situation. I have thought about flipping my swaybar mounts and I could recess the bumper about another inch grabbing the frame on all 4 bolts except then I would have about an inch of metal between the bolts and the old holes and I wouldn't be able to run a winch unless I cut into the grill... Any suggestions?