fascia rear bumper and lights

pvanweelden

pvanweelden

New member
Just thought I would share, for anyone getting a fascia panel, and are wanting to run rear lights. Without a bumper or fascia, you can do the cube leds, like Moby, but with the fascia, there's not enough room. I found these 1x6 led lights for $30 pair, and they are short enough to still fit on top of the fascia without being in the way of the tailgate.
uploadfromtaptalk1390331042177.jpg
Or you can do as I plan on doing, and mount them inside the fascia panel, and drilling 3/4" holes for each led to shine through the fascia, there is 2" of space between the fascia and the top of the rear frame support
uploadfromtaptalk1390331138038.jpg
 
Last edited:
here's the specs on the lights i got- available from amazon or ebay
 

Attachments

  • 534eff89-93cf-b1be-77de-e609655668c4.jpg
    534eff89-93cf-b1be-77de-e609655668c4.jpg
    101.4 KB · Views: 414
very cool idea! im sure we will see some people buy the Evo one or make their own like you did and possibly run the same type of set up as you. :thumb:
 
Here's what it would look like with the lights mounted between fascia and frame rail
1390711155870.jpg

Sent from my SM-N900V using WAYALIFE mobile app
 
Here it is painted- I used a uni bit and cut wheel to make the holes for lights. 1/4" drill bit and 1/4" × 3/4" countersunk bolt to mount.
1390916966548.jpg

Sent from my SM-N900V using WAYALIFE mobile app
 
Thanks ramin and army vet! On the quick disconnects, I always use a simple plastic or rubber chair leg protector (7/8" or 1") 4 for $3
1391002643445.jpg

Sent from my SM-N900V using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom