Evo Roll center bracket

[TheGrendel]

Does anyone have the hardware details for the evo roll center. I picked this up from a guy, but he didn't have the ubolts. Sent a note to the evo email address but haven't heard back yet.

TIA

 

[hinrichs]

I think its 3" U-bolts. The bracket should be welded on however tho.

 

[TheGrendel]

I think its 3" U-bolts. The bracket should be welded on however tho.

agreed. will definitely have it welded when i get everything set up the way i want it. just takes money to get there :broke:

 

[aermotor]

Hard to tell from the pic, but is that for normal springs or coilovers? It looks like it's the flat on the rear facing side? What setup is this going on?

 

[Mybadjk]

Hard to tell from the pic, but is that for normal springs or coilovers? It looks like it's the flat on the rear facing side? What setup is this going on?

It's the coilover mount. I'm running one with springs.


Sent from my iPhone using WAYALIFE mobile app

 

[aermotor]

Yep, it looked like it. Didn't know if the OP has springs or coilovers, but that one won't work with standard springs.

 

[TheGrendel]

Well now I went back to the link the seller provided and the picture I have and it doesn't look the same. Link provided by seller.

https://www.northridge4x4.com/part/...-roll-center-correction-trackbar-bracket-rear


So this won't work with coil springs?

 

[aermotor]

Would need to see a photo of the bracket from the side to know for sure.

 

[TheGrendel]

Would need to see a photo of the bracket from the side to know for sure.

I'll take more photos when I get home.

 

[aermotor]

I'm pretty positive that is for coilovers and will not work because the bracket itself will hits the springs. The one for springs is recessed out, away from the axle and springs to provide clearance.

 

[piginajeep]

I'm pretty positive that is for coilovers and will not work because the bracket itself will hits the springs. The one for springs is recessed out, away from the axle and springs to provide clearance.

What he said. 100% correct


Sent from my iPhone using WAYALIFE mobile app

 

[TheGrendel]

yup. i can see what you guys are talking about. clearly not right. i was fine with it not being "like new". but, to send a completely different bracket. why can't people just be honest and do what they say.

i messaged him about it. lets see what he has to say.

 

[piginajeep]

Most people don't know there's a difference.


Sent from my iPhone using WAYALIFE mobile app

 

[aermotor]

Most people don't know there's a difference.

^^^ This is exactly it.

I have one I'll be taking off soon, it's a bit cut up (had to cut it off cause it was welded), but works, and if welded on would be good.

 

[TheGrendel]

well, it sounds like an honest mistake. he's going to refund me. but dang.