EVO Alumilite Front Bumper

Jackboeker83

Jackboeker83

Active Member
Does anyone have pictures of one installed without the loop bar and skid plate? The ones on the website aren’t that great and I’m having a hard time find some one the inter webs. I’m torn between that one or the 1/4 pounder. I like the 1/4 pounder for its high clearance and being able to tuck up the rubicon sway bar motor but it’s just too square. The Alumilite looks like it might have a bit more style while allowing the high clearance and tucking the motor but I can’t get a decent picture to see if I like it.
 
Here are some with the hoop but no skid. Never installed without the hoop but you get the idea. I really love this bumper, saving it for my next jeep
 

Attachments

  • EA0C8889-1BC9-4585-807A-D924561064B0.jpeg
    EA0C8889-1BC9-4585-807A-D924561064B0.jpeg
    216.2 KB · Views: 39
  • 1ED5FEF0-CAC2-41D7-9922-939C59959114.jpeg
    1ED5FEF0-CAC2-41D7-9922-939C59959114.jpeg
    199 KB · Views: 39
  • F5EF1C2D-063C-4EFC-BE9E-C9E76A144944.jpeg
    F5EF1C2D-063C-4EFC-BE9E-C9E76A144944.jpeg
    175.5 KB · Views: 38
benatc1 said:
Here are some with the hoop but no skid. Never installed without the hoop but you get the idea. I really love this bumper, saving it for my next jeep
Click to expand...
Thanks for the pics. From what I can tell you don’t have to cut the bottom supports off and the bottom of the bumper doesnt go as far back as the 1/4 pounder. Not sure if I’m explaining that clearly enough. Is there anyway you can get a picture of it in the sun and a picture of underneath the bumper. No rush… whenever you have time.

i do like the bumper shape with the bar though. It looks good.
 
Jackboeker83 said:
Thanks for the pics. From what I can tell you don’t have to cut the bottom supports off and the bottom of the bumper doesnt go as far back as the 1/4 pounder. Not sure if I’m explaining that clearly enough. Is there anyway you can get a picture of it in the sun and a picture of underneath the bumper. No rush… whenever you have time.

i do like the bumper shape with the bar though. It looks good.
Click to expand...
It’s not currently installed on a jeep, had to maneuver car situation but let me see what pics I can find. If I recall correctly you do not have to make any cuts, unlike the quarter pounder, Which is also a great bumper, and it also does not fit quite as tight as quarter pounder. While I prefer the alumalite bumper I wouldn’t hesitate the slightest to get the quarter pounder either as I ran it before and loved it too. I’ll see what pics I can find
 
benatc1 said:
It’s not currently installed on a jeep, had to maneuver car situation but let me see what pics I can find. If I recall correctly you do not have to make any cuts, unlike the quarter pounder, Which is also a great bumper, and it also does not fit quite as tight as quarter pounder. While I prefer the alumalite bumper I wouldn’t hesitate the slightest to get the quarter pounder either as I ran it before and loved it too. I’ll see what pics I can find
Click to expand...
I think they both are great bumpers just trying to see which one I like better. Thanks for looking and once again no rush.
 
You must log in or register to reply here.
Top Bottom