Drag link flip: what is the minimum spring height?

[TheGrendel]

I bought the Synergy 3 inch multirate coils this time around. From what I have gathered from other posters, these springs are more like 3.5 inches of lift. Should i go with adj trackbar or a drag link flip and trackbar bracket?

Will I lose uptravel with the drag link flip?

 

[JKDream]

I bought the Synergy 3 inch multirate coils this time around. From what I have gathered from other posters, these springs are more like 3.5 inches of lift. Should i go with adj trackbar or a drag link flip and trackbar bracket?

Will I lose uptravel with the drag link flip?

Minimum of three generally to see any benefit.
Yes you will - you need at least a 3 inch bump to run high steer otherwise it hits the frame.

 

[WJCO]

If you are happy with the ride and don't have bump steer, just leave it be.

 

[TheGrendel]

If you are happy with the ride and don't have bump steer, just leave it be.

haven't put them on yet. i'm piecing together my lift. this one of the last decisions i have left. adj trackbar is cheaper unless it turns out that i should have done a drag link flip in the first place. lol. :thinking:

 

[WJCO]

haven't put them on yet. i'm piecing together my lift. this one of the last decisions i have left. adj trackbar is cheaper unless it turns out that i should have done a drag link flip in the first place. lol. :thinking:

Take before and after measurements to see the actual gain.