Double Adjustable Control Arm Links (JK stock length)

[aTX427]

I am selling my double adjustable control arm links. They were fabricated from 2x2x.250 square tube and were made to work with dual Currie Johnny Joints, however most any 1.25-12 rod end will work. As a point of reference, I am using them on a Evo bolt on coilover suspension and do not have any binding whatsoever with these arms. (2) Front lower, (2) Rear lower, (2) Rear upper - $80 per pair or $200 for the set of (6). This is for the link only - no JJ's.

 

[OverlanderJK]

$80 for two or $200 for four? :thinking:


Sent from my iPhone using WAYALIFE mobile app

 

[aTX427]

$80 for two or $200 for four? :thinking:


Sent from my iPhone using WAYALIFE mobile app

No, for the set of (6) - Front lowers, rear lowers and rear uppers. The pictures were all I had prior to installation.

 

[Benito]

i think someone is getting long arms.

 

[jeeeep]

you're not including the johnny joints?

who made the arms?

 

[WJCO]

you're not including the johnny joints?

who made the arms?

He made the arms himself.

 

[aTX427]

you're not including the johnny joints?

who made the arms?

I fabricated the arms myself with the intention of repurposing the Johnny Joints for long arms down the road. Depending on your budget or purpose, you can install whatever ends you want, but they were designed to be of equal or longer length than stock using Currie ends.


Sent from my iPhone using WAYALIFE mobile app