Jheapr
New member
I got a little creative with a grinder the other night, and decided to turn my factory fenders from this 
To this
Took about 2 hours, a grinder, 5" cutting disk, grinding disk, a drill, hood pins, and a 6 pack.
I lined up the hood pins in existing holes on top of my grill, should be easy to find but I can get a picture if you need one.
Next I followed that dirt line you see against the seam, cutting off the whole fender and leaving the inner fender.
After cutting and cleaning, I sprayed my fenders with some flat black spray paint.
Saved a few hundred bucks for the time being, and I think it looks pretty bitchin.
Sent from my iPhone using WAYALIFE mobile app
To this
Took about 2 hours, a grinder, 5" cutting disk, grinding disk, a drill, hood pins, and a 6 pack.
I lined up the hood pins in existing holes on top of my grill, should be easy to find but I can get a picture if you need one. Next I followed that dirt line you see against the seam, cutting off the whole fender and leaving the inner fender.
After cutting and cleaning, I sprayed my fenders with some flat black spray paint.
Saved a few hundred bucks for the time being, and I think it looks pretty bitchin.
Sent from my iPhone using WAYALIFE mobile app
