Control arms to add to the enforcer

[bl17z90]

So when i upgrade to the evo enforcer whoch control arms would be a good addition to the kit if k want to have all 8?

I was thinkjg currie since the use the same johny joints and would be able to handle the flex this kit has.


Sent from my phone?

 

[tapcola]

Doesn't EVO make control Arms ?

 

[olram30]

currie if you want johnny joints.

 

[bl17z90]

Doesn't EVO make control Arms ?

They have long arma which are out of my price range. The only short arms they sell are the front lower


Sent from my phone?

 

[Sharkey]

I'm not really sure why you want to swap out the front uppers. The stock fuca work well with the Enforcer.

Seeing as you have a 2-door, you may want rear upper control arms and a new rear shaft at some point. I'm not sure you would need rear lowers though.

Save the money for other mods and get only what you need.

 

[bl17z90]

I'm not really sure why you want to swap out the front uppers. The stock fuca work well with the Enforcer.

Seeing as you have a 2-door, you may want rear upper control arms and a new rear shaft at some point. I'm not sure you would need rear lowers though.

Save the money for other mods and get only what you need.

Rear uppers were my main concern.


Sent from my phone?

 

[piginajeep]

Rear uppers were my main concern.


Sent from my phone?

Go with currie, keep the joints all the same.

 

[bbailey]

Rokmen. Johnnie Joints on each end. Personally, I like them better than the ones from Currie. That said, you can't go wrong with either.

 

[bl17z90]

Rokmen. Johnnie Joints on each end. Personally, I like them better than the ones from Currie. That said, you can't go wrong with either.

Never heard of Rokmen.


Sent from my phone?

 

[piginajeep]

Rokmen. Johnnie Joints on each end. Personally, I like them better than the ones from Currie. That said, you can't go wrong with either.

Whys that?

 

[bbailey]

Whys that?

Welds looked to be of higher quality on the Rokmen arms versus Currie but realistically, both are very good options.

 

[StrizzyChris]

Their price isn't impressive vs Currie's. I think I'd stick with the name brand unless I am being lured in with some real savings!