Cannot use Sway Bar Disconnect

[Redtraillanai]

Hey guys! I’m a new owner of Jeep Gladiator 2020 Rubicon. I have question about the Sway bar disconnect I couldn’t use them because of tire fill alert. I put my 38” tires on 20 psi. Also I have done doing the tire fill alert setting before deflation. I set it to 20 psi in uconnect screen. Its still giving me alert. Do you guys have this problem? I couldn’t use my sway bar because of the alert in my gauges.

 

[BaddestCross]

One shouldn't affect the other. Were you in 4H and going less than 20mph?



--
Build Thread - Adventures of Fiona - https://wayalife.com/showthread.php?t=47407

 

[BlueRubicon]

Tire pressure should not affect sway bar solenoid motor function. Like stated above...were you in 4L? Is this the first time you have attempted to use?

 

[Redtraillanai]

Tire pressure should not affect sway bar solenoid motor function. Like stated above...were you in 4L? Is this the first time you have attempted to use?

4H And not driving. Everytime I press sway bar diaconnect. It says “Tire PSI is too low”.

 

[Whitarmy]

4H And not driving. Everytime I press sway bar diaconnect. It says “Tire PSI is too low”.

Pretty sure it wants you to be in 4 low.


2008 JKU
2014 JKR
2020 JTR

 

[nbunga]

Doesn’t say anything about tire pressure but apparently you can use it in 4 hi. I thought you had to be in 4lo as well.
https://youtu.be/jn2Do1qte4k



Sent from my iPhone using WAYALIFE

 

[-AINOKEA-]

I use mine in 4hi all the time. Did you install a tazer or something to reconfigure tire size and pressure warning settings? Try setting your pressure warning to a lower psi and try again. There might be some kind of safety thing associated with that, though I’m not sure why. People air down to 10 or lower all the time while wheeling disconnected.


Sent from my iPhone using WAYALIFE