Build Hard Rock rear bumper

[CastleRockJeep]

I now have the metal “shell” for a rear hard rock bumper, I bit off more than I can chew as it is missing everything. I have 1 and 4 from this photo. If I buy “3” both sides will that get it mounted while I petition my wife for “6”? Your input would be great, looking to get it mounted, then add “6” then pieces that are aesthetic.


Sent from my iPhone using WAYALIFE mobile app

 

[H8ROADS]

Are you in a hurry? I’ll probably change my rear setup in the coming months and I’d likely just give you all of it if you wanted it.


Sent from my iPhone using WAYALIFE mobile app

 

[CastleRockJeep]

Are you in a hurry? I’ll probably change my rear setup in the coming months and I’d likely just give you all of it if you wanted it.


Sent from my iPhone using WAYALIFE mobile app

Wow, not in a big enough hurry to pass up a great deal, thank you for the offer.:clap2:

 

[Bear_JT]

I have a #11 off of my Sport. Not sure if that would work for you as it’s driver side mounted.


Sent from my iPhone using WAYALIFE mobile app

 

[jorgelrod]

you need "7" or you might bend it when you tighten the bolts, 7 is the piece you put in between the frame and the bumper when you don't have the hitch.

 

[CastleRockJeep]

you need "7" or you might bend it when you tighten the bolts, 7 is the piece you put in between the frame and the bumper when you don't have the hitch.

Okay, Thanks!


Sent from my iPhone using WAYALIFE mobile app