I found this...
http://www.quadratec.com/products/51109_200X_PG.htm
And it says this...
During testing, a 2007 JK with 37" tires and 5.38 gears gained an impressive 40% more horsepower and 37% more torque at the wheels!
the one nice thing about a supercharger over a turbo is that it is instant power.
Not from what I've seen.
not to argue with you Eddie but was it in a jeep or another vehicle?
It's all good, I'm only referring to superchargers that I've seen in Jeeps and on the trail and I have seen quite a few. I have yet to be impressed.
Eddie is totally correct for the Ripp style blowers. All the vortech/procharger style superchargers make power later on in the band. I haven't seen any Jeeps with the sprintex or AEV/Magnuson style roots blowers yet but these typically deliver full torque extremely early on in the power band. I'm still content with my 3.8 and regear.... though that may be because I refuse to get behind the wheel of a 3.6 let alone anything supercharged or hemi/LS swapped.
cozdude said:yea im sure on the trail they are not that impressive.
i guess where i was coming from with my original staement is that my brothers '06 chevy cobalt SS supercharged (only upgrade from stock is exhaust) out ran his friends '12 subi sti due to the fact he had more direct power because of the supercharger.
but once again we are talking Jeeps here which are a few hundred lbs heavier than either one
Did they mention where that additional power was coming in at? I don't question whether or not you will get more power but I'd like to see real and independent dyno numbers. I know people who have them all swear by them but from what I have seen, superchargers deliver the goods high up on the RPM and way too late to be useful on big rocks and ledges. But, that's what I have seen. For what little you really get and at upwards of $6000, I think I would save up a bit more and look into doing a 5.3L LS swap instead. Way cheaper than doing a HEMI and will give you real and useable HP and torque. But, that's just me. :yup:
The Sprintex is definitely better but for how much they cost and what little you really get, I personally would prefer forwarding that money toward an LS. Like you, I'm content enough with a 3.8L motor and over the last 6+ years, it's been able to get me over just about anything I wanted. Also, I love the extra power that the 3.6L provides on my 2012 but, after seeing a JK with a small 5.3L LS in it, there's just no comparison. Unlike a HEMI or even a 6.2L LS, a 5.3L LS can be found for cheap and just about anywhere and so upgrading to one is surprisingly more affordable than most would think.
Oh yeah, on pavement and in a smaller and lighter cobalt, I'm sure you'd see real power. On a Jeep weighing 6,000 lbs. and up, I just haven't seen it make a difference where it really counts. Not saying that you wouldn't see power, just not enough or where you'd want it for the $6k price tag.
Have you ever noticed how much faster JK's are when you remove the hardtops and doors? It's like 100HP!!!!!!
Weight reduction...cheapest way to gain speed!:rock:
1BAMFR said:Yes, We need to see some dyno graphs showing an overlay of stock vs. this blower.
"Usually" a roots style blower will hit hard down low but I'm comparing my experience to a V8 motor...these V6's might need a little more time to build that initial "hit" in power.
In a JK I would much rather have the power and torque of a badass N/A V8, but this caught my eye as a quick bolt on some power in a weekend. I would still worry about tranny heat and the bottom-end.