I had death wobble on my 04 Rubi and found the track bar bushing was shot, so I replaced the track bar with OEM. I looked at Eddie's excellent thread on causes of death wobble and I don't quite understand the torque specs.
It says to torque the nuts to 125 Ft/lb but the instructions with the track bar say frame end 60, and axle end 40. I'm guessing the castle nut should be 60, and the frame bolt should be 40, then the mount brackets themselves should be 125?
Don't mean to be ignorant, but still get a death wobble at times, and I am trying to learn more about working on my jeep, but don't want to break anything.
Thanks in advance.
It says to torque the nuts to 125 Ft/lb but the instructions with the track bar say frame end 60, and axle end 40. I'm guessing the castle nut should be 60, and the frame bolt should be 40, then the mount brackets themselves should be 125?
Don't mean to be ignorant, but still get a death wobble at times, and I am trying to learn more about working on my jeep, but don't want to break anything.
Thanks in advance.